INA116PAG4 vs INA116PA Perbandingan

Perbandingan bersamaan detil INA116PAG4 dari Texas Instruments dan INA116PA dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Texas Instruments
INA116PAG4 INA116PAG4 - Ultra-Low Bias Instrumentation Amplifier | TI

INA116PAG4 - Ultra-Low Bias Instrumentation Amplifier | TI

INA116PAG4 Obsolete
Texas Instruments
INA116PA INA116PA - 3fA Ultra Low Bias Current In-Amp | TI

INA116PA - 3fA Ultra Low Bias Current In-Amp | TI

INA116PA ✓ Aktif

Perbandingan Spesifikasi

Parameter Umum INA116PAG4 INA116PA
Merek Texas Instruments Texas Instruments
Kategori Amplifier ICs Amplifier ICs
Status Lingkungan Hidup Obsolete Aktif
Product Type Precision instrumentation amplifier —
Number of Amplifiers 1 circuit —
Typical Input Bias Current at 25°C 3 fA —
Input Bias Current at 85°C 25 fA —
Maximum Input Offset Voltage 2 mV —
Typical Input Offset Voltage 5 mV —
Common-Mode Rejection Ratio 94 dB —
Bandwidth 800 kHz —
Slew Rate 0.08 V/µs —
Gain Range 1 to 1000 1 V/V to 1000 V/V
Supply Voltage Range ±4.5 V to ±18 V —
Tipe Output Single-ended —
Input Architecture DIFET FET input —
Guard Drive Buffered guard-drive pins —
Paket 16-pin PDIP 16-PDIP (N)
Tipe Mounting Through-hole Through Hole
Rentang Suhu Kerja [DATA_NEEDED: operating temperature range] -40C to +85C
Status RoHS Green product [DATA_NEEDED: RoHS status]
Maximum Input Voltage ±40 V —
Amplifier Type — Instrumentation Amplifier
Number of Channels — 1
Input Bias Current (typ) — 3 fA at 25C
Input Bias Current (at 85C) — 25 fA
Input Offset Voltage (max) — 2 mV
CMRR (min) — 86 dB
Input Noise Density at 1 kHz — 28 nV/sqrt(Hz)
Arus Memerintah — 1 mA
Supply Voltage Range (single) — 9 V to 36 V
Supply Voltage Range (dual) — +/-4.5 V to +/-18 V
Input Technology — Difet FET with buffered guard drive
Input Overvoltage Protection — Yes

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon