INA116PAG4 vs INA116PA השוואה

השוואה מפורטת זה לצד זה של INA116PAG4 מאת Texas Instruments ו INA116PA מאת Texas Instruments. השווה מפרטים עיקריים, פרמטרים חשמליים, אריזה, סטטוס מחזור חיים, תמחור וזמינות כדי לקבוע את הרכיב הטוב ביותר לדרישות העיצוב שלך.

Texas Instruments
INA116PAG4 INA116PAG4 - Ultra-Low Bias Instrumentation Amplifier | TI

INA116PAG4 - Ultra-Low Bias Instrumentation Amplifier | TI

INA116PAG4 Obsolete
Texas Instruments
INA116PA INA116PA - 3fA Ultra Low Bias Current In-Amp | TI

INA116PA - 3fA Ultra Low Bias Current In-Amp | TI

INA116PA ✓ פעיל

השוואת מפרטים

פרמטר INA116PAG4 INA116PA
מותג Texas Instruments Texas Instruments
קטגוריה Amplifier ICs Amplifier ICs
סטטוס מחזור חיים Obsolete פעיל
Product Type Precision instrumentation amplifier —
Number of Amplifiers 1 circuit —
Typical Input Bias Current at 25°C 3 fA —
Input Bias Current at 85°C 25 fA —
Maximum Input Offset Voltage 2 mV —
Typical Input Offset Voltage 5 mV —
Common-Mode Rejection Ratio 94 dB —
Bandwidth 800 kHz —
Slew Rate 0.08 V/µs —
Gain Range 1 to 1000 1 V/V to 1000 V/V
Supply Voltage Range ±4.5 V to ±18 V —
סוג פלט Single-ended —
Input Architecture DIFET FET input —
Guard Drive Buffered guard-drive pins —
מארז 16-pin PDIP 16-PDIP (N)
סוג הרכבה Through-hole Through Hole
טווח טמפרטורת פעולה [DATA_NEEDED: operating temperature range] -40C to +85C
סטטוס RoHS Green product [DATA_NEEDED: RoHS status]
Maximum Input Voltage ±40 V —
Amplifier Type — Instrumentation Amplifier
Number of Channels — 1
Input Bias Current (typ) — 3 fA at 25C
Input Bias Current (at 85C) — 25 fA
Input Offset Voltage (max) — 2 mV
CMRR (min) — 86 dB
Input Noise Density at 1 kHz — 28 nV/sqrt(Hz)
זרם מנוחה — 1 mA
Supply Voltage Range (single) — 9 V to 36 V
Supply Voltage Range (dual) — +/-4.5 V to +/-18 V
Input Technology — Difet FET with buffered guard drive
Input Overvoltage Protection — Yes

Datasheets ומשאבים

עיין בכל המוצרים צור BOM בקשת הצעת מחיר