INA126PA vs INA126P Perbandingan
Perbandingan bersamaan detil INA126PA dari Texas Instruments dan INA126P dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | INA126PA | INA126P |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Obsolete | Aktif |
| Device Type | Single-channel precision instrumentation amplifier | — |
| Maximum Supply Voltage | 36 V | 36 V |
| Supply Voltage Range | ±1.35 V to ±18 V | ±1.35 V to ±18 V |
| Minimum Total Supply Voltage | 2.7 V | — |
| Arus Memerintah | 175 µA per channel | 175 µA/channel typical |
| Input Offset Voltage | 250 µV | 250 µV |
| Architecture | Two-operating-amplifier instrumentation amplifier | Two-op-amp instrumentation amplifier |
| Gain Range | 1 V/V to 1000 V/V | — |
| Small-Signal Bandwidth | 200 kHz | — |
| Slew Rate | 0.04 V/µs | — |
| Number of Amplifiers | 1 circuit | — |
| Paket | 8-pin PDIP | 8-pin PDIP |
| Tipe Mounting | Through-hole | Through-hole |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Gain-Setting Resistance | [DATA_NEEDED: gain-setting resistance] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Product Type | — | Precision micropower instrumentation amplifier |
| Programmable Gain | — | 1, 10, 100, or 1000 using external resistor |
| Differential Signal Acquisition | — | Precision low-noise differential input |
| Channel Count | — | 1 channel |
| Terminal Count | — | 8 terminals |
| Package Shape | — | Rectangular DIP |
| Temperature Grade | — | Industrial |
| Application Class | — | Portable instrumentation and data acquisition |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |