INA126PA vs INA126P 비교
다음의 상세 나란히 비교: INA126PA 제조: Texas Instruments 및 INA126P 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | INA126PA | INA126P |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | Obsolete | 활성 |
| Device Type | Single-channel precision instrumentation amplifier | — |
| Maximum Supply Voltage | 36 V | 36 V |
| Supply Voltage Range | ±1.35 V to ±18 V | ±1.35 V to ±18 V |
| Minimum Total Supply Voltage | 2.7 V | — |
| 대기 전류 | 175 µA per channel | 175 µA/channel typical |
| Input Offset Voltage | 250 µV | 250 µV |
| Architecture | Two-operating-amplifier instrumentation amplifier | Two-op-amp instrumentation amplifier |
| Gain Range | 1 V/V to 1000 V/V | — |
| Small-Signal Bandwidth | 200 kHz | — |
| Slew Rate | 0.04 V/µs | — |
| Number of Amplifiers | 1 circuit | — |
| 패키지 | 8-pin PDIP | 8-pin PDIP |
| 실장 유형 | Through-hole | Through-hole |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Gain-Setting Resistance | [DATA_NEEDED: gain-setting resistance] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Product Type | — | Precision micropower instrumentation amplifier |
| Programmable Gain | — | 1, 10, 100, or 1000 using external resistor |
| Differential Signal Acquisition | — | Precision low-noise differential input |
| Channel Count | — | 1 channel |
| Terminal Count | — | 8 terminals |
| Package Shape | — | Rectangular DIP |
| Temperature Grade | — | Industrial |
| Application Class | — | Portable instrumentation and data acquisition |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |