INA128HD vs INA128UA Perbandingan
Perbandingan bersamaan detil INA128HD dari Texas Instruments dan INA128UA dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | INA128HD | INA128UA |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Type | Precision instrumentation amplifier | — |
| Number of Channels | 1 channel | 1 channel |
| Common-Mode Rejection Ratio | 130 dB | 130 dB |
| Common-Mode Rejection Ratio at Gain 100 or Higher | 93 dB minimum | — |
| Typical Offset Voltage | 25 µV | — |
| Typical Input Bias Current | 50 nA | — |
| Gain Range | 1 to 10,000 V/V | 1 to 10,000 V/V |
| Gain-Bandwidth Product | 1.3 MHz | 1.3 MHz |
| Slew Rate | 4 V/µs | — |
| Typical Quiescent Current | 700 µA | — |
| Supply Voltage Range | 4.5 V to 36 V total, equivalent to ±18 V | -18 V to +18 V |
| Maximum Input Protection Range | ±40 V | — |
| Gain-Setting Resistor | 49.4 kΩ | — |
| Paket | 8-pin SOIC, 0.154 inch body width, 3.90 mm | 8-pin SOIC, 3.90 mm width |
| Tipe Mounting | Surface mount | Surface mount |
| Packaging | Bulk | — |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | -40 degC to +85 degC |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Product Type | — | Precision low-power instrumentation amplifier |
| Minimum Common-Mode Rejection Ratio | — | 120 dB |
| Maximum Offset Voltage | — | 50 uV |
| Maximum Offset Voltage Drift | — | 0.5 uV/degC |
| Maximum Input Bias Current | — | 5 nA |
| Arus Memerintah | — | 700 uA |
| Bandwidth at Gain 100 | — | 200 kHz |
| Input Protection Range | — | -40 V to +40 V |
| Minimum Dual Supply Voltage | — | -2.25 V to +2.25 V |
| Architecture | — | Three-op-amp instrumentation amplifier with current-feedback input circuitry |
| Status RoHS | — | Compliant |