INA128HD vs INA128UA Karşılaştırma
Ayrıntılı yan yana karşılaştırma INA128HD tarafından Texas Instruments ve INA128UA tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | INA128HD | INA128UA |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Amplifier Type | Precision instrumentation amplifier | — |
| Number of Channels | 1 channel | 1 channel |
| Common-Mode Rejection Ratio | 130 dB | 130 dB |
| Common-Mode Rejection Ratio at Gain 100 or Higher | 93 dB minimum | — |
| Typical Offset Voltage | 25 µV | — |
| Typical Input Bias Current | 50 nA | — |
| Gain Range | 1 to 10,000 V/V | 1 to 10,000 V/V |
| Gain-Bandwidth Product | 1.3 MHz | 1.3 MHz |
| Slew Rate | 4 V/µs | — |
| Typical Quiescent Current | 700 µA | — |
| Supply Voltage Range | 4.5 V to 36 V total, equivalent to ±18 V | -18 V to +18 V |
| Maximum Input Protection Range | ±40 V | — |
| Gain-Setting Resistor | 49.4 kΩ | — |
| Paket | 8-pin SOIC, 0.154 inch body width, 3.90 mm | 8-pin SOIC, 3.90 mm width |
| Montaj Türü | Surface mount | Surface mount |
| Packaging | Bulk | — |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | -40 degC to +85 degC |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Product Type | — | Precision low-power instrumentation amplifier |
| Minimum Common-Mode Rejection Ratio | — | 120 dB |
| Maximum Offset Voltage | — | 50 uV |
| Maximum Offset Voltage Drift | — | 0.5 uV/degC |
| Maximum Input Bias Current | — | 5 nA |
| Durağan Akım | — | 700 uA |
| Bandwidth at Gain 100 | — | 200 kHz |
| Input Protection Range | — | -40 V to +40 V |
| Minimum Dual Supply Voltage | — | -2.25 V to +2.25 V |
| Architecture | — | Three-op-amp instrumentation amplifier with current-feedback input circuitry |
| RoHS Durumu | — | Compliant |