INA2126U vs INA2126UA Perbandingan
Perbandingan bersamaan detil INA2126U dari Texas Instruments dan INA2126UA dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
INA2126U - 36V Dual Micropower Instrumentation Amplifier | Texas Instruments
INA2126U ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | INA2126U | INA2126UA |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Type | Dual precision instrumentation amplifier | Dual precision instrumentation amplifier |
| Number of Channels | 2 channels | 2 channels |
| Maximum Total Supply Voltage | 36 V | — |
| Operating Supply Range | ±1.35 V to ±18 V | — |
| Minimum Total Supply Voltage | 2.7 V | — |
| Quiescent Current per Channel | 175 µA | 175 µA |
| Maximum Input Offset Voltage | 250 µV | — |
| Minimum Voltage Gain | 5 V/V | 5 V/V |
| Maximum Voltage Gain | 10000 V/V | 10,000 V/V |
| Typical Gain-Bandwidth Product | 200 kHz | — |
| Typical Input Noise Density at 1 kHz | 0.4 nV/√Hz | — |
| Internal Architecture | Two-op-amp instrumentation amplifier | — |
| Paket | 16-pin SOIC | 16-pin SOIC (D) |
| Tipe Mounting | Surface mount | Surface mount |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | -40°C to +85°C |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Maximum Supply Voltage | — | 36 V |
| Minimum Supply Voltage | — | 2.7 V |
| Input Offset Voltage | — | 250 µV |
| Gain Error | — | 0.04% maximum |
| Gain-Bandwidth Product | — | 200 kHz |
| Input Noise at 1 kHz | — | [DATA_NEEDED: input noise at 1 kHz] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection ratio] |