INA2126U vs INA2126UA Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci INA2126U disebabkan oleh Texas Instruments dan INA2126UA disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Texas Instruments
INA2126U - 36V Dual Micropower Instrumentation Amplifier | Texas Instruments
INA2126U ✓ AktifPengandingan Spesifikasi
| Parametr | INA2126U | INA2126UA |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Type | Dual precision instrumentation amplifier | Dual precision instrumentation amplifier |
| Number of Channels | 2 channels | 2 channels |
| Maximum Total Supply Voltage | 36 V | — |
| Operating Supply Range | ±1.35 V to ±18 V | — |
| Minimum Total Supply Voltage | 2.7 V | — |
| Quiescent Current per Channel | 175 µA | 175 µA |
| Maximum Input Offset Voltage | 250 µV | — |
| Minimum Voltage Gain | 5 V/V | 5 V/V |
| Maximum Voltage Gain | 10000 V/V | 10,000 V/V |
| Typical Gain-Bandwidth Product | 200 kHz | — |
| Typical Input Noise Density at 1 kHz | 0.4 nV/√Hz | — |
| Internal Architecture | Two-op-amp instrumentation amplifier | — |
| Kemasan | 16-pin SOIC | 16-pin SOIC (D) |
| Jenis Pemasangan | Surface mount | Surface mount |
| Gambaran Suhu Operasi | [DATA_NEEDED: operating temperature range] | -40°C to +85°C |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Maximum Supply Voltage | — | 36 V |
| Minimum Supply Voltage | — | 2.7 V |
| Input Offset Voltage | — | 250 µV |
| Gain Error | — | 0.04% maximum |
| Gain-Bandwidth Product | — | 200 kHz |
| Input Noise at 1 kHz | — | [DATA_NEEDED: input noise at 1 kHz] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection ratio] |