ISL83485IBZ-T vs ISL83483IB Perbandingan
Perbandingan bersamaan detil ISL83485IBZ-T dari Renesas Electronics dan ISL83483IB dari Renesas Electronics. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Renesas Electronics
ISL83485IBZ-T - 3.3V 10Mbps RS-485/422 Transceiver, 8-SOIC | Renesas
ISL83485IBZ-T ⚠ Waktu Beli TerakhirRenesas Electronics
ISL83483IB - 3.3V 250kbps RS-485/RS-422 Transceiver | Renesas
ISL83483IB ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | ISL83485IBZ-T | ISL83483IB |
|---|---|---|
| Merek | Renesas Electronics | Renesas Electronics |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Waktu Pembelian Terakhir | Aktif |
| Fungsi | Transceiver | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Protocol | RS-422, RS-485 | — |
| Laju Data | 10 Mbps | — |
| Tegangan Pemuat | 3.3 V | — |
| Supply Voltage Range | 3.0 V to 3.6 V | 3 V to 3.6 V |
| Receiver Input Impedance | 1/8 unit-load (up to 256 nodes) | — |
| Suhu Kerja | -40C to +85C | — |
| Paket | 8-SOIC (IB) 3.9 mm | 8-pin SOIC, 3.6 mm wide body |
| Tipe Mounting | Surface Mount | Surface mount |
| Level MSL | [DATA_NEEDED: MSL level] | — |
| Status RoHS | ROHS3 Compliant | [DATA_NEEDED: RoHS compliance status] |
| Shutdown Pin | Yes | — |
| Process Technology | BiCMOS | — |
| ESD Protection (HBM) | [DATA_NEEDED: ESD rating kV] | — |
| Product Type | — | Half-duplex RS-485/RS-422 differential transceiver |
| Nominal Supply Voltage | — | 3.3 V |
| Maximum Data Rate | — | 250 kbps |
| Communication Mode | — | Half-duplex |
| Supported Standards | — | RS-485 and RS-422 |
| Driver Architecture | — | BiCMOS slew-rate-limited output |
| Transceiver Configuration | — | Single transmitter/receiver |
| Rentang Suhu Kerja | — | [DATA_NEEDED: operating temperature range in degrees Celsius] |
| Arus Pemuat | — | [DATA_NEEDED: typical and maximum supply current in milliamperes] |
| Driver Output Current | — | [DATA_NEEDED: maximum driver output current in milliamperes] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity in millivolts] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range in volts] |
| Slew Rate | — | Slew-rate limited; exact value [DATA_NEEDED: volts per microsecond] |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |