ISO1430DWR vs ISO1450DW Perbandingan
Perbandingan bersamaan detil ISO1430DWR dari Texas Instruments dan ISO1450DW dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
ISO1450DW - 50 Mbps 5 kVrms Isolated RS-485/RS-422 | Texas Instruments
ISO1450DW ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | ISO1430DWR | ISO1450DW |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Galvanically isolated half-duplex RS-485 and RS-422 transceiver | Isolated RS-485/RS-422 transceiver |
| Maximum Data Rate | 12 Mbps | 50 Mbps |
| Isolation Rating | 5 kVrms | — |
| Transceiver Configuration | 1 transmitter and 1 receiver | 1/1 half-duplex |
| Duplex Mode | Half-duplex | — |
| EMC Protection | Protected against ESD and EFT bus events | EMC protected |
| Interface Standards | TIA/EIA RS-485 and RS-422 | — |
| Rentang Suhu Kerja | -40°C to +125°C | -40 °C to 125 °C |
| Paket | 16-pin SOIC (DW) | 16-pin SOIC wide-body (DW) |
| Tipe Mounting | Surface mount | Surface mount |
| Logic Supply Voltage | [DATA_NEEDED: logic-side supply voltage] | — |
| Bus-side Supply Voltage | [DATA_NEEDED: bus-side supply voltage] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver sensitivity] | — |
| Common-Mode Transient Immunity | [DATA_NEEDED: common-mode transient immunity] | — |
| ESD Protection Rating | [DATA_NEEDED: ESD protection rating] | — |
| EFT Protection Rating | [DATA_NEEDED: EFT protection rating] | — |
| Isolation Capacitance | [DATA_NEEDED: isolation capacitance] | — |
| Lead Finish | [DATA_NEEDED: lead finish] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Isolation Voltage | — | 5 kVrms |
| Supply Voltage Range | — | 1.71 V to 5.5 V |
| Supported Standards | — | TIA/EIA RS-485 and RS-422 |
| Differential Communication | — | Yes |
| Direction Control | — | Half-duplex |
| Isolation Type | — | Galvanic isolation |
| Logic Compatibility | — | 1.71 V to 5.5 V supply operation |
| Manufacturer Evaluation Module | — | ISO1410DWEVM for related ISO1410 evaluation |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |