ISO1450BDWR vs ISO1430DWR Perbandingan
Perbandingan bersamaan detil ISO1450BDWR dari Texas Instruments dan ISO1430DWR dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
ISO1450BDWR - 50Mbps 5kVrms Isolated RS-485/RS-422 Transceiver | Texas Instruments
ISO1450BDWR ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | ISO1450BDWR | ISO1430DWR |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Fungsi | Isolated half-duplex RS-485 / RS-422 transceiver | — |
| Data Rate (max) | 50 Mbps | — |
| Isolation Voltage (rms) | 5 kVrms (reinforced) | — |
| Number of Drivers / Receivers | 1/1 | — |
| Duplex | Half | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis voltage] | — |
| Supply Voltage VCC1 (logic side) | 3 V to 5.5 V | — |
| Supply Voltage VCC2 (bus side) | Internally generated by isolated DC-DC | — |
| Bus Pin ESD (IEC 61000-4-2) | ±16 kV (air / contact, per datasheet) | — |
| Bus Pin ESD (HBM) | ±4 kV | — |
| IEC 61000-4-4 EFT Immunity | ±4 kV | — |
| Surge Immunity | [DATA_NEEDED: IEC 61000-4-5 surge rating] | — |
| Unit Load | 1/8 (up to 256 nodes on bus) | — |
| Common-Mode Range | Wide common-mode bus voltage range (per datasheet) | — |
| Penutupan Panas | Yes | — |
| Current Limiting | Yes | — |
| Low-Power Standby | Yes | — |
| Suhu Kerja | -40C to +125C | — |
| Paket | SOIC-16 wide-body (DW), 16 pins | 16-pin SOIC (DW) |
| Tipe Mounting | Surface Mount | Surface mount |
| Level MSL | 3 (per JEDEC J-STD-020) | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Compliance Standards | TIA/EIA-485-A, TIA/EIA-422, IEC 61000-4-2, IEC 61000-4-4 | — |
| Product Type | — | Galvanically isolated half-duplex RS-485 and RS-422 transceiver |
| Maximum Data Rate | — | 12 Mbps |
| Isolation Rating | — | 5 kVrms |
| Transceiver Configuration | — | 1 transmitter and 1 receiver |
| Duplex Mode | — | Half-duplex |
| EMC Protection | — | Protected against ESD and EFT bus events |
| Interface Standards | — | TIA/EIA RS-485 and RS-422 |
| Rentang Suhu Kerja | — | -40°C to +125°C |
| Logic Supply Voltage | — | [DATA_NEEDED: logic-side supply voltage] |
| Bus-side Supply Voltage | — | [DATA_NEEDED: bus-side supply voltage] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| Common-Mode Transient Immunity | — | [DATA_NEEDED: common-mode transient immunity] |
| ESD Protection Rating | — | [DATA_NEEDED: ESD protection rating] |
| EFT Protection Rating | — | [DATA_NEEDED: EFT protection rating] |
| Isolation Capacitance | — | [DATA_NEEDED: isolation capacitance] |
| Lead Finish | — | [DATA_NEEDED: lead finish] |
| REACH Status | — | [DATA_NEEDED: REACH status] |