ITS4075QEPDXUMA1 vs ITS6080SEPDXUMA1 Perbandingan

Perbandingan bersamaan detil ITS4075QEPDXUMA1 dari Infineon dan ITS6080SEPDXUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Infineon
ITS6080SEPDXUMA1 ITS6080SEPDXUMA1 - 8A Smart High-Side Switch | Infineon

ITS6080SEPDXUMA1 - 8A Smart High-Side Switch | Infineon

ITS6080SEPDXUMA1 ✓ Aktif

Perbandingan Spesifikasi

Parameter Umum ITS4075QEPDXUMA1 ITS6080SEPDXUMA1
Merek Infineon Infineon
Kategori Power MOSFET Drivers Power MOSFET Drivers
Status Lingkungan Hidup Aktif Aktif
Part Number ITS4075QEPDXUMA1 —
Part Family ITS4075Q-EP-D (PROFET Industrial) —
Fungsi Quad-channel smart high-side power switch / load driver —
Number of Channels 4 1
Typical On-State Resistance (RDS(ON)) 75 mΩ (datasheet headline) / 120 mΩ typical at Tj = 125 °C —
Maximum Load Current per Channel 2.6 A —
Tegangan Pemuat Kerja [DATA_NEEDED: nominal supply range minimum and maximum] —
Maximum Supply Voltage 45 V —
On-State Resistance Max (per channel) [DATA_NEEDED: maximum RDS(ON) spec at 25 °C] —
Rentang Suhu Kerja -40 °C to +150 °C -40 C to +150 C
Junction Temperature Maximum +150 °C —
Switch Type High-side, N-channel MOSFET with charge pump N-Channel high-side
Diagnostic Feedback Current proportional sense (IS pin) per channel —
Protection Features Overcurrent, short-circuit, over-temperature, overvoltage, undervoltage lockout Overload current limit, short-circuit shutdown, thermal shutdown, over-voltage clamp, ESD protection
Integrated Charge Pump Yes —
Reverse Polarity Protection Requires external 150 Ω resistor or reverse diode (per datasheet) —
Paket PG-TSDSO-14 (14-pin TSSOP with exposed pad) PG-TSDSO-14 (14-pin TSDSO with exposed pad)
Tipe Mounting Surface Mount Surface Mount
Status RoHS Compliant —
Level MSL [DATA_NEEDED: MSL rating] [DATA_NEEDED: MSL rating]
Lead-Free Yes —
Product Type — Smart High-Side Power Switch
Family — PROFET Industrial 75 mOhm
On-State Resistance (Rds(on)) — 75 mOhm typical
Continuous Load Current — 8 A
Operating Supply Voltage (Vbb) — 5 V to 34 V
Load Dump Protection — 62 V
Konfigurasi Output — 1:1 (high-side)
Diagnostic Features — Current sense output, fault feedback
Automotive Qualification — AEC-Q100 qualified

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon