ITS4075QEPDXUMA1 vs ITS6080SEPDXUMA1 比較
詳細並排比較 ITS4075QEPDXUMA1 由 Infineon 與 ITS6080SEPDXUMA1 由 Infineon. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | ITS4075QEPDXUMA1 | ITS6080SEPDXUMA1 |
|---|---|---|
| 品牌 | Infineon | Infineon |
| 類別 | Power MOSFET Drivers | Power MOSFET Drivers |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Part Number | ITS4075QEPDXUMA1 | — |
| Part Family | ITS4075Q-EP-D (PROFET Industrial) | — |
| 功能 | Quad-channel smart high-side power switch / load driver | — |
| Number of Channels | 4 | 1 |
| Typical On-State Resistance (RDS(ON)) | 75 mΩ (datasheet headline) / 120 mΩ typical at Tj = 125 °C | — |
| Maximum Load Current per Channel | 2.6 A | — |
| 工作電源電壓 | [DATA_NEEDED: nominal supply range minimum and maximum] | — |
| Maximum Supply Voltage | 45 V | — |
| On-State Resistance Max (per channel) | [DATA_NEEDED: maximum RDS(ON) spec at 25 °C] | — |
| 工作溫度範圍 | -40 °C to +150 °C | -40 C to +150 C |
| Junction Temperature Maximum | +150 °C | — |
| Switch Type | High-side, N-channel MOSFET with charge pump | N-Channel high-side |
| Diagnostic Feedback | Current proportional sense (IS pin) per channel | — |
| Protection Features | Overcurrent, short-circuit, over-temperature, overvoltage, undervoltage lockout | Overload current limit, short-circuit shutdown, thermal shutdown, over-voltage clamp, ESD protection |
| Integrated Charge Pump | Yes | — |
| Reverse Polarity Protection | Requires external 150 Ω resistor or reverse diode (per datasheet) | — |
| 封裝 | PG-TSDSO-14 (14-pin TSSOP with exposed pad) | PG-TSDSO-14 (14-pin TSDSO with exposed pad) |
| 安裝類型 | Surface Mount | Surface Mount |
| RoHS 狀態 | Compliant | — |
| MSL 等級 | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL rating] |
| Lead-Free | Yes | — |
| Product Type | — | Smart High-Side Power Switch |
| Family | — | PROFET Industrial 75 mOhm |
| On-State Resistance (Rds(on)) | — | 75 mOhm typical |
| Continuous Load Current | — | 8 A |
| Operating Supply Voltage (Vbb) | — | 5 V to 34 V |
| Load Dump Protection | — | 62 V |
| 輸出配置 | — | 1:1 (high-side) |
| Diagnostic Features | — | Current sense output, fault feedback |
| Automotive Qualification | — | AEC-Q100 qualified |