KSZ8041FTL-S vs KSZ8041TL Perbandingan

Perbandingan bersamaan detil KSZ8041FTL-S dari Microchip Technology dan KSZ8041TL dari Microchip Technology. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Microchip Technology
KSZ8041FTL-S KSZ8041FTL-S - 10/100 Ethernet PHY | Microchip | 48-TQFP

KSZ8041FTL-S - 10/100 Ethernet PHY | Microchip | 48-TQFP

KSZ8041FTL-S ✓ Aktif
Microchip Technology
KSZ8041TL KSZ8041TL 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TL 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TL ✓ Aktif

Perbandingan Spesifikasi

Parameter Umum KSZ8041FTL-S KSZ8041TL
Merek Microchip Technology Microchip Technology
Kategori Interface ICs Interface ICs
Status Lingkungan Hidup Aktif Aktif
Product Type 10/100 Ethernet physical-layer transceiver 10BASE-T/100BASE-TX Ethernet physical-layer transceiver
Ethernet Standards 10Base-T and 100Base-TX —
Host Interface MII, RMII, and SMII —
Number of Transmitters 1 channel —
Number of Receivers 1 channel —
Supply Voltage Range 3.135 V to 3.465 V —
Supply Type Single supply —
Auto MDI/MDIX Support HP Auto MDI/MDIX —
Paket 48-TQFP, 7 x 7 mm 48-TQFP (7 x 7 mm)
Jumlah Pin 48 pins —
Tipe Mounting Surface mount Surface mount
Laju Data 10 Mb/s and 100 Mb/s —
Mixed-Signal Architecture Extended signaling distance and reduced power consumption —
Configuration Strapping Speed, duplex, auto-negotiation, power-down, and PHY address —
Suhu Kerja [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Status RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Supported Data Rates — 10 Mb/s and 100 Mb/s
Host Interfaces — MII, RMII, and SMII
Supply Architecture — Single-supply
Cable Standard — 10BASE-T and 100BASE-TX
Mixed-Signal Design — Yes; intended to extend signaling distance while reducing power consumption
Auto MDI/MDIX — HP Auto MDI/MDIX
Interrupt Signal — INTRP on pin 32; optional PHY-register status-update signal
Number of Drivers/Receivers — 1 driver and 1 receiver
Device Type — Ethernet interface IC / physical-layer transceiver
Tegangan Pemuat — [DATA_NEEDED: supply voltage range]
Interface Clock — [DATA_NEEDED: clock frequency]
Ethernet Magnetics — [DATA_NEEDED: supported magnetics and isolation configuration]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon