LM2902KPWR vs LM358BIPWR Perbandingan
Perbandingan bersamaan detil LM2902KPWR dari Texas Instruments dan LM358BIPWR dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
LM2902KPWR - Quad 26V 1.2MHz Op Amp | Texas Instruments (Tape & Reel)
LM2902KPWR ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | LM2902KPWR | LM358BIPWR |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Number of Amplifiers | 4 amplifiers | — |
| Amplifier Type | General-purpose operational amplifier | Dual general-purpose operational amplifier |
| Maximum Supply Voltage | 26 V | — |
| Gain-Bandwidth Product | 1.2 MHz | — |
| Improved ESD Protection | 2 kV | — |
| Rentang Suhu Kerja | -40 °C to +125 °C | -40 °C to +85 °C |
| Supply Type | Single-supply operation | — |
| Compensation | Internally frequency compensated | — |
| Paket | 14-pin TSSOP | 8-pin TSSOP (PW) |
| Package Width | 4.40 mm | — |
| Package Lead Width | 0.173 inch | — |
| Tipe Mounting | Surface mount | Surface mount |
| Circuit Count | 4 circuits | — |
| Kategori | Instrumentation, operational amplifiers, buffer amplifiers | — |
| Input Offset Voltage | [DATA_NEEDED: Input offset voltage] | 3 mV |
| Input Bias Current | [DATA_NEEDED: Input bias current] | [DATA_NEEDED: input bias current] |
| Slew Rate | [DATA_NEEDED: Slew rate] | [DATA_NEEDED: slew rate] |
| Output Current | [DATA_NEEDED: Output current] | — |
| Common-Mode Input Range | [DATA_NEEDED: Common-mode input range] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Number of Channels | — | 2 channels |
| Supply Voltage Range | — | 3 V to 36 V |
| Unity-Gain Bandwidth | — | 1.2 MHz |
| Arus Memerintah | — | 300 uA per channel |
| Common-Mode Input Voltage Range | — | Includes ground |
| Product Type | — | Standard (General Purpose) Amplifier |
| Internal Compensation | — | Internally compensated |
| Unity-Gain Stability | — | [DATA_NEEDED: unity-gain stability configuration] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Total Noise Voltage | — | [DATA_NEEDED: total input-referred noise voltage] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |