LM2902KPWR vs LM358BIPWR Karşılaştırma
Ayrıntılı yan yana karşılaştırma LM2902KPWR tarafından Texas Instruments ve LM358BIPWR tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
LM2902KPWR - Quad 26V 1.2MHz Op Amp | Texas Instruments (Tape & Reel)
LM2902KPWR ✓ AktifÖzellik Karşılaştırması
| Parametre | LM2902KPWR | LM358BIPWR |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Number of Amplifiers | 4 amplifiers | — |
| Amplifier Type | General-purpose operational amplifier | Dual general-purpose operational amplifier |
| Maximum Supply Voltage | 26 V | — |
| Gain-Bandwidth Product | 1.2 MHz | — |
| Improved ESD Protection | 2 kV | — |
| İşletim Sıcaklığı Aralığı | -40 °C to +125 °C | -40 °C to +85 °C |
| Supply Type | Single-supply operation | — |
| Compensation | Internally frequency compensated | — |
| Paket | 14-pin TSSOP | 8-pin TSSOP (PW) |
| Package Width | 4.40 mm | — |
| Package Lead Width | 0.173 inch | — |
| Montaj Türü | Surface mount | Surface mount |
| Circuit Count | 4 circuits | — |
| Kategori | Instrumentation, operational amplifiers, buffer amplifiers | — |
| Input Offset Voltage | [DATA_NEEDED: Input offset voltage] | 3 mV |
| Input Bias Current | [DATA_NEEDED: Input bias current] | [DATA_NEEDED: input bias current] |
| Slew Rate | [DATA_NEEDED: Slew rate] | [DATA_NEEDED: slew rate] |
| Output Current | [DATA_NEEDED: Output current] | — |
| Common-Mode Input Range | [DATA_NEEDED: Common-mode input range] | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Number of Channels | — | 2 channels |
| Supply Voltage Range | — | 3 V to 36 V |
| Unity-Gain Bandwidth | — | 1.2 MHz |
| Durağan Akım | — | 300 uA per channel |
| Common-Mode Input Voltage Range | — | Includes ground |
| Product Type | — | Standard (General Purpose) Amplifier |
| Internal Compensation | — | Internally compensated |
| Unity-Gain Stability | — | [DATA_NEEDED: unity-gain stability configuration] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Total Noise Voltage | — | [DATA_NEEDED: total input-referred noise voltage] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |