LM2903D vs LM2903QDG4 Perbandingan
Perbandingan bersamaan detil LM2903D dari Texas Instruments dan LM2903QDG4 dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
LM2903QDG4 - Dual Differential Comparator, 36 V | Texas Instruments
LM2903QDG4 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | LM2903D | LM2903QDG4 |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Channels | 2 channels | — |
| Supply Voltage Range | 2 V to 36 V | 2 V to 36 V |
| Tipe Output | Open-collector | Open-collector |
| Response Time | 300 ns | — |
| Paket | 8-pin SOIC | 8-pin SOIC, 3.90 mm width |
| Tipe Mounting | Surface mount | Surface mount |
| Rentang Suhu Kerja | -40 °C to +125 °C | -40 °C to 125 °C |
| Supply Configuration | Single supply or split supply | — |
| Channel Independence | Two independent comparator channels | — |
| Output Logic Style | Open-collector, pull-up resistor required | — |
| Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Arus Memerintah | [DATA_NEEDED: supply current per channel] | — |
| Propagation Delay | 300 ns response time | — |
| Output High Voltage | [DATA_NEEDED: output high-level voltage with pull-up] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: automotive qualification status] |
| Number of Comparator Channels | — | 2 channels |
| Dual-Supply Total Voltage Range | — | 2 V to 36 V |
| Logic Compatibility | — | TTL, CMOS, and MOS compatible |
| Differential Input Type | — | Differential |
| Single-Supply Operation | — | Supported |
| Dual-Supply Operation | — | Supported |
| Independent Comparators | — | 2 independent channels |
| Differential Input Voltage Range | — | ±36 V |
| Output Pull-Up Requirement | — | External pull-up resistor required |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Standard Tape-and-Reel Quantity | — | [DATA_NEEDED: standard tape-and-reel quantity] |