LM2903D vs LM2903QDG4 So sánh
So sánh chi tiết song song của LM2903D bằng Texas Instruments và LM2903QDG4 bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
LM2903QDG4 - Dual Differential Comparator, 36 V | Texas Instruments
LM2903QDG4 ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | LM2903D | LM2903QDG4 |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Channels | 2 channels | — |
| Supply Voltage Range | 2 V to 36 V | 2 V to 36 V |
| Kiểu đầu ra | Open-collector | Open-collector |
| Response Time | 300 ns | — |
| Hộp | 8-pin SOIC | 8-pin SOIC, 3.90 mm width |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Khoảng nhiệt độ hoạt động | -40 °C to +125 °C | -40 °C to 125 °C |
| Supply Configuration | Single supply or split supply | — |
| Channel Independence | Two independent comparator channels | — |
| Output Logic Style | Open-collector, pull-up resistor required | — |
| Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Điện áp yên tĩnh | [DATA_NEEDED: supply current per channel] | — |
| Propagation Delay | 300 ns response time | — |
| Output High Voltage | [DATA_NEEDED: output high-level voltage with pull-up] | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: automotive qualification status] |
| Number of Comparator Channels | — | 2 channels |
| Dual-Supply Total Voltage Range | — | 2 V to 36 V |
| Logic Compatibility | — | TTL, CMOS, and MOS compatible |
| Differential Input Type | — | Differential |
| Single-Supply Operation | — | Supported |
| Dual-Supply Operation | — | Supported |
| Independent Comparators | — | 2 independent channels |
| Differential Input Voltage Range | — | ±36 V |
| Output Pull-Up Requirement | — | External pull-up resistor required |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Standard Tape-and-Reel Quantity | — | [DATA_NEEDED: standard tape-and-reel quantity] |