LM2904DGKR vs LM2904DG Perbandingan
Perbandingan bersamaan detil LM2904DGKR dari Texas Instruments dan LM2904DG dari onsemi. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | LM2904DGKR | LM2904DG |
|---|---|---|
| Merek | Texas Instruments | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Type | General-purpose operational amplifier | Dual general-purpose operational amplifier |
| Number of Channels | 2 channels | 2 channels |
| Maximum Supply Voltage | 26 V | — |
| Gain-Bandwidth Product | 700 kHz | 1 MHz |
| Tipe Output | Push-pull | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage for LM2904DGKR] | 7 mV |
| Common-Mode Input Range | Extends to ground | Extends to ground and VEE |
| Differential Input Voltage | [DATA_NEEDED: maximum differential input voltage] | — |
| Supply Operation | Single supply or split supply | — |
| Minimum Stable Gain | 10 V/V | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Input Resistance | [DATA_NEEDED: input resistance] | — |
| Output Current | [DATA_NEEDED: output current] | [DATA_NEEDED: output current] |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 0.6 V/us |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | -40 C to +105 C |
| Paket | 8-pin VSSOP | 8-pin SOIC |
| Tipe Mounting | Surface mount | Surface mount |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: LM2904DG RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: LM2904DG REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Supply Voltage Range | — | 3 V to 32 V |
| Common-Mode Rejection Ratio | — | 50 dB minimum |
| Supply Configuration | — | Single supply or split supply |
| Arus Memerintah | — | [DATA_NEEDED: quiescent current] |
| Gain Error | — | [DATA_NEEDED: gain error] |