LM2904DGKR vs LM2904DG موازنہ
تفصیلی ساتھ ساتھ موازنہ از LM2904DGKR بذریعہ Texas Instruments اور LM2904DG بذریعہ onsemi. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
خصوصیات کا موازنہ
| پیرامیٹر | LM2904DGKR | LM2904DG |
|---|---|---|
| برانڈ | Texas Instruments | onsemi |
| زمرہ | Amplifier ICs | Amplifier ICs |
| لائف سائیکل کی حالت | فعال | فعال |
| Amplifier Type | General-purpose operational amplifier | Dual general-purpose operational amplifier |
| Number of Channels | 2 channels | 2 channels |
| Maximum Supply Voltage | 26 V | — |
| Gain-Bandwidth Product | 700 kHz | 1 MHz |
| آؤٹ پٹ کی قسم | Push-pull | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage for LM2904DGKR] | 7 mV |
| Common-Mode Input Range | Extends to ground | Extends to ground and VEE |
| Differential Input Voltage | [DATA_NEEDED: maximum differential input voltage] | — |
| Supply Operation | Single supply or split supply | — |
| Minimum Stable Gain | 10 V/V | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Input Resistance | [DATA_NEEDED: input resistance] | — |
| Output Current | [DATA_NEEDED: output current] | [DATA_NEEDED: output current] |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 0.6 V/us |
| آپریٹنگ درجہ حرارت رینج | [DATA_NEEDED: operating temperature range] | -40 C to +105 C |
| پیکیج | 8-pin VSSOP | 8-pin SOIC |
| ماؤنٹنگ ٹائپ | Surface mount | Surface mount |
| RoHS اسٹیٹس | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: LM2904DG RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: LM2904DG REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Supply Voltage Range | — | 3 V to 32 V |
| Common-Mode Rejection Ratio | — | 50 dB minimum |
| Supply Configuration | — | Single supply or split supply |
| کوئیسینٹ کرنٹ | — | [DATA_NEEDED: quiescent current] |
| Gain Error | — | [DATA_NEEDED: gain error] |