LM324KN vs LM324ADR2G Perbandingan
Perbandingan bersamaan detil LM324KN dari Texas Instruments dan LM324ADR2G dari onsemi. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | LM324KN | LM324ADR2G |
|---|---|---|
| Merek | Texas Instruments | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Count | 4 circuits | — |
| Product Type | General-purpose operational amplifier | — |
| Number of Channels | 4 independent channels | — |
| Paket | 14-PDIP | — |
| Jumlah Pin | 14 pins | — |
| Tipe Mounting | Through-hole | Surface Mount |
| Supply Configuration | Single supply or split supply | — |
| Maximum Supply Voltage | 36 V | — |
| Typical Supply-Current Drain | 0.8 mA | — |
| Common-Mode Input Range | Includes ground | — |
| ESD Protection | 2 kV | — |
| Frequency Compensation | Internal | — |
| Low Input Bias Current | [DATA_NEEDED: low input bias current value] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Gain-Bandwidth Product | [DATA_NEEDED: gain-bandwidth product] | — |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | — |
| Status RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Amplifier Type | — | General Purpose |
| Number of Circuits | — | 4 |
| Supply Voltage Range (Single) | — | 3 V to 32 V |
| Supply Voltage Range (Split) | — | ±1.5 V to ±16 V |
| Gain Bandwidth Product | — | 1 MHz |
| Slew Rate | — | 0.6 V/µs |
| Input Offset Voltage (Max) | — | 3 mV |
| Input Offset Voltage (Typ) | — | [DATA_NEEDED: Input Offset Voltage typical] |
| Technology | — | Bipolar |
| Paket / Case | — | 14-SOIC (0.154in, 3.90mm Width) |
| Suhu Kerja | — | 0C to +70C (Commercial) |
| Packaging | — | Tape & Reel (R2G suffix) |
| Input Bias Current | — | [DATA_NEEDED: Input Bias Current] |
| Supply Current (per amp, typical) | — | [DATA_NEEDED: Supply Current] |