LM324KN - Quad 14-PDIP General-Purpose Op Amp | Texas Instruments
MPN: LM324KN ✓ AktifLM324KN Ringkasan
An operational amplifier is an analog signal-conditioning IC that uses feedback to control gain, amplify differential inputs, buffer sensors, and perform general-purpose analog calculations. The LM324 family belongs to the operational-amplifier hierarchy within analog and mixed-signal semiconductors. Its common-mode input range includes ground, making it useful in circuits powered from a positive rail and sensing signals near 0 V.
The four independent channels can perform simultaneous amplification, filtering, buffering, or summing functions while sharing one package. Internal frequency compensation makes the LM324 suitable for general-purpose closed-loop amplifier designs without external compensation networks. Its low 0.8 mA typical supply-current drain helps reduce system power consumption, while the broad supply capability supports industrial and legacy equipment operating from multiple rail voltages.
Common applications include sensor-signal conditioning, low-level current-to-voltage conversion, audio preamplification, active filtering, comparators with additional biasing, and general instrumentation. The 14-pin PDIP format also supports manual assembly and through-hole prototyping in laboratories, educational equipment, industrial control systems, and repair products.
When designing an LM324KN circuit, verify input and output voltage limits against the selected operating rail, including output swing limitations when driving capacitive loads. Place input compensation or bias resistors close to the relevant amplifier pins, keep feedback loops short, and provide stable bypassing at the supply pins to limit noise and prevent oscillation.
This product page combines the LM324KN package and feature information with practical analog-design guidance, application context, verified alternatives, and a parameter comparison for faster component selection.
Alternatif penggantian untuk LM324KN — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian LM324KN (sama faktor bentuk dan footprint) — berbeda di dalam Package, Number of Channels, Product Type, Mounting Type, Amplifier Type.
LM324N
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →LM324ADR2G
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →LM324BAIDR
✅ Drop-InKontak untuk harga
Lihat Datasheet →LMC660
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
LM2904P3
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →LM324KN Rating Maksimal & Karakteristik Listrik
| Amplifier Count | 4 circuits |
| Product Type | General-purpose operational amplifier |
| Number of Channels | 4 independent channels |
| Paket | 14-PDIP |
| Jumlah Pin | 14 pins |
| Tipe Mounting | Through-hole |
| Supply Configuration | Single supply or split supply |
| Maximum Supply Voltage | 36 V |
| Typical Supply-Current Drain | 0.8 mA |
| Common-Mode Input Range | Includes ground |
| ESD Protection | 2 kV |
| Frequency Compensation | Internal |
| Status RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
Konfigurasi Pin LM324KN
| Pin produk 1 | OUT1 — Output of amplifier 1 |
| Pin produk 2 | IN1- — Inverting input of amplifier 1 |
| Pin produk 3 | IN1+ — Non-inverting input of amplifier 1 |
| Pin produk 4 | V- — Negative supply connection |
| Pin produk 5 | IN2+ — Non-inverting input of amplifier 2 |
| Pin produk 6 | IN2- — Inverting input of amplifier 2 |
| Pin produk 7 | OUT2 — Output of amplifier 2 |
| Pin produk 8 | OUT3 — Output of amplifier 3 |
| Pin produk 9 | IN3- — Inverting input of amplifier 3 |
| Pin produk 10 | IN3+ — Non-inverting input of amplifier 3 |
| Pin produk 11 | V+ — Positive supply connection |
| Pin produk 12 | IN4+ — Non-inverting input of amplifier 4 |
| Pin produk 13 | IN4- — Inverting input of amplifier 4 |
| Pin produk 14 | OUT4 — Output of amplifier 4 |
Aplikasi Umum
LM324KN cocok untuk 6 aplikasis: Industrial Sensor Signal Conditioning, Current-to-Voltage Conversion, Audio Preamplification, Active Filtering and Control Loops, Battery-Powered Portable Instruments, Educational and Laboratory Analog Circuits.
Industrial Sensor Signal Conditioning
LM324KN fits industrial sensor-conditioning circuits that amplify low-level sensor outputs into a voltage range suitable for measurement or control. Its four independent channels can process separate inputs without requiring multiple packages, while internal frequency compensation simplifies closed-loop amplifier design. The common-mode input range includes ground, which is valuable when sensing signals near 0 V from resistive dividers, potentiometers, or resistive bridges. The 14-PDIP format also supports through-hole control boards that use conventional leaded assembly. Designers should verify output swing at the selected supply voltage and keep input and feedback routing short to preserve accuracy.
Direkomendasikan
Current-to-Voltage Conversion
LM324KN is useful in current-to-voltage converter circuits where a small shunt voltage must be amplified for an ADC, meter, or analog display. Because its common-mode input range includes ground, a shunt positioned near the ground return can be measured effectively with a single positive supply. The device provides four independently usable amplifiers, allowing one channel to perform conversion while the others support buffering, gain stages, or offset conditioning. Verify the maximum input and output voltages, account for input bias current when choosing shunt and feedback resistors, and confirm stability with the capacitance presented by the downstream ADC or display.
Direkomendasikan
Audio Preamplification
LM324KN can serve in general-purpose audio preamplifier and mixer stages built around small-signal source devices. Its four-channel organization permits multiple buffered inputs without using separate packages, and the low 0.8 mA typical supply-current drain suits low-power analog sections. The internal frequency compensation supports straightforward closed-loop voltage-amplifier configurations, including non-inverting and inverting stages. Audio-system design should still consider the source impedance, gain error caused by bias current, output-loading tolerance, and bandwidth requirements. A common-mode input range including ground supports single-supply biasing, provided the signal and output remain inside the device's specified swing limits.
Direkomendasikan
Active Filtering and Control Loops
LM324KN is appropriate for active filter, gain-control, and simple analog-control loops where four interchangeable amplifier channels improve board utilization. Its internally compensated design is intended for conventional closed-loop operation, so first-order and basic second-order filter sections can often be implemented directly with passive R and C networks. Component tolerances and the amplifier's finite gain and bandwidth still influence cutoff accuracy and phase margin. Keep the feedback components close to their associated pins, avoid long high-impedance routes, and evaluate the final response across the intended supply range. The DIP package through-hole footprint makes it convenient for educational, prototype, and legacy industrial-control boards.
Direkomendasikan
Battery-Powered Portable Instruments
LM324KN can fit portable measurement instruments and battery-operated control products that require multiple low-power analog channels. Its four independent amplifiers reduce package count, and the 0.8 mA typical supply-current drain helps conserve power relative to a design using four separate amplifiers. The common-mode range including ground is useful in systems that operate from one positive rail, while broad supply compatibility supports different battery-derived voltage options. Designers should check quiescent and load-current behavior at the intended temperature, confirm that output swing leaves adequate headroom for the ADC or comparator, and account for input bias current when source impedances become high.
Direkomendasikan
Educational and Laboratory Analog Circuits
LM324KN is well suited to educational laboratories, breadboard-based prototypes, and through-hole analog training systems. Four independent amplifiers on one 14-PDIP package let students build amplifier, comparator, summing, buffer, and active-filter circuits without separate packages for every stage. Internal frequency compensation simplifies introductory closed-loop experiments, while the ability to operate from single or split supplies demonstrates both common analog biasing methods. Before connecting student circuits, use current limiting and protected laboratory supplies. For precision exercises, include input bias current, output swing, and finite open-loop gain in the analysis rather than treating the amplifier as ideal.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk LM324KN — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | LM324N | LM324A | LM324B | LMC660 | LM2904P3 |
|---|---|---|---|---|---|---|
| Package | 14-PDIP | 14-PDIP - same | 14-PDIP - same | 14-PDIP - same | 14-PDIP - same | 14-PDIP - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Amplifier Count | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits |
| Special Characteristic | Standard LM324 general-purpose amplifier | Standard LM324 family | LM324A accuracy variant | Improved B-version specifications | Greater bandwidth and input resistance | LM2904 operating-grade profile |
Diferensiator Kunci
- Four independent channels in one through-hole package (vsLM2904P3)
- Established LM324 electrical behavior (vsLMC660)
- Improved offset specification available in the related B version (vsLM324B)
Catatan Desain
Do not assume an ideal amplifier: the LM324 input bias current creates offset error across high source impedances, and its output cannot necessarily reach either supply rail. Select the feedback resistors with source impedance and bias current in mind, and confirm output swing for the actual load. When the LM324 is used as a comparator, use an appropriate pull-up or pull-down and include hysteresis where required by the input offset voltage.
Keep each amplifier's feedback loop physically compact and connect compensation or bias components directly to the relevant pins. Avoid routing high-impedance input nodes near power-supply traces and switching nodes. Place supply bypassing close to pins 4 and 11, with a short ground return, and preserve adequate copper around power connections for current flow and heat dissipation. Check the final PCB for unintended coupling between adjacent amplifier channels.
Estimated: with a 12 V input, a 5 V output, and a 10 mA load, linear-regulator dissipation is approximately 70 mW using P = (VIN - VOUT) × IOUT. Verify the actual source and output currents across all operating modes, including startup and load transients. The package and board copper must dissipate the resulting heat without pushing the junction beyond its device-specific temperature limit.
Operational-amplifier output stability can be affected by excessive capacitive loading, particularly when driving long cables, ADC inputs, or relay contacts. Add a small isolation resistor close to the output when capacitive loading is unavoidable, and evaluate the resulting gain response. Also avoid very high closed-loop gains with large feedback resistors unless the resulting bias-current error and bandwidth behavior have been checked.
Informasi Konformitas
The LM324KN is a general-purpose analog IC and is not an AEC-Q100-qualified automotive ordering option. Current manufacturer material-declaration records are required to establish RoHS, REACH, lead-free, halogen-free, and conflict-minerals status.
