LPC845M301JHI33 vs MK20DN128VMP5 Perbandingan
Perbandingan bersamaan detil LPC845M301JHI33 dari NXP Semiconductors dan MK20DN128VMP5 dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
NXP Semiconductors
MK20DN128VMP5 - Kinetis K20 50MHz Cortex-M4 MCU, 128KB Flash | NXP
MK20DN128VMP5 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | LPC845M301JHI33 | MK20DN128VMP5 |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Microcontrollers | Microcontrollers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Core | Arm Cortex-M0+ (32-bit) | — |
| Maximum CPU Frequency | 30 MHz | — |
| Program Memory (Flash) | 64 KB (64K x 8) | — |
| SRAM | 16 KB | 16 KB |
| Paket | 32-HVQFN (5x5 mm) | 64-MAPBGA (5x5 mm) |
| Tipe Mounting | Surface Mount | Surface Mount (MAPBGA) |
| Suhu Kerja | -40 C to +105 C | — |
| Supply Voltage (VDD) | 1.8 V to 3.6 V | — |
| I/O Pins | Up to 28 GPIO | — |
| ADC | 12-bit, up to 12 channels | 16-bit SAR, multiple channels |
| DAC | 10-bit | — |
| Analog Comparators | 2 | — |
| I2C Interfaces | 4 (Fast-mode Plus) | — |
| USART | Up to 5 | — |
| SPI Interfaces | Up to 2 | — |
| Capacitive Touch (CAPT) | Yes | — |
| Timers | Multi-rate timer, SCTimer/PWM, self-wake-up timer, watchdog | — |
| CRC Engine | Yes | — |
| DMA Channels | Yes (per datasheet) | [DATA_NEEDED: DMA channel count] |
| Debug Interface | Serial Wire Debug (SWD) | — |
| Status RoHS | Compliant | Compliant |
| Core Architecture | — | ARM Cortex-M4 with FPU |
| Core Bit Width | — | 32-bit |
| Frekuensi Bawah Maximum | — | 50 MHz |
| Program Flash Memory | — | 128 KB (128K x 8) |
| USB Controller | — | USB 2.0 Full-Speed Device/Host/OTG with on-chip transceiver |
| Tegangan Pemuat | — | 1.8 V / 2.5 V / 3.3 V |
| Rentang Suhu Kerja | — | -40C to +105C (industrial) |
| Number of I/O Pins | — | [DATA_NEEDED: GPIO count] |
| Communication Interfaces | — | UART, SPI, I2C, USB |
| Low-Power Modes | — | Run, Wait, Stop, VLPR, VLPW, VLPS, LLS, VLLSx |
| Series / Sub-Family | — | Kinetis K20 (K20 Sub-Family, 50 MHz) |
| Level MSL | — | 3 (per JEDEC J-STD-020) |