LT8364HMSE#PBF vs LT8364EMSE Perbandingan
Perbandingan bersamaan detil LT8364HMSE#PBF dari Analog Devices dan LT8364EMSE dari Analog Devices. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Analog Devices
LT8364HMSE#PBF - 60V, 4A Boost/SEPIC/Inverting DC/DC Converter | ADI
LT8364HMSE#PBF ✓ AktifAnalog Devices
LT8364EMSE - 60V 4A Boost/SEPIC/Inverting Converter | Analog Devices
LT8364EMSE ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | LT8364HMSE#PBF | LT8364EMSE |
|---|---|---|
| Merek | Analog Devices | Analog Devices |
| Kategori | DC-DC Converters | DC-DC Converters |
| Status Lingkungan Hidup | Aktif | Aktif |
| Topologi | Boost, SEPIC, Inverting | Boost, SEPIC, or Inverting (selectable via single FB pin) |
| Rentang Tegangan Masukan | 2.8 V to 60 V | 2.8 V to 60 V |
| Switch Current Rating | 4 A peak | 4 A peak |
| Switch Voltage Rating | 60 V | 60 V maximum |
| Output Voltage Range (Boost/SEPIC) | 1.6 V to 60 V | — |
| Konfigurasi Output | Positive fixed (single output) | — |
| Frekuensi Pengganti | 1.4 MHz to 2 MHz (programmable via RT) | — |
| Default Switching Frequency | 2 MHz | — |
| Quiescent Current (Burst Mode) | 9 µA | 9 uA typical |
| Typical Output Ripple | < 15 mV | — |
| Control Mode | Current-mode | — |
| Feedback Pin | Single FB (positive or negative feedback) | — |
| Rentang Suhu Hubung Kerja | -40 °C to +150 °C (H grade) | — |
| Paket | 12-lead MSOP with exposed pad (MSE) | 16-pin MSOP (12-lead) with Exposed Pad (MSE), 3.00 mm body width |
| Tipe Mounting | Surface Mount | Surface Mount |
| Level MSL | 1 | 1 (per JEDEC J-STD-020, unlimited floor life) |
| Status RoHS | Compliant (Pb-free #PBF suffix) | Compliant |
| Mulai Dengan Lebih Lambat | Internal | — |
| Penutupan Panas | Yes (internal) | — |
| Rentang Tegangan Output | — | 1.6 V to 60 V (boost/SEPIC); negative in inverting |
| Output Ripple (Burst Mode) | — | 15 mV typical |
| Internal Oscillator Frequency | — | 2 MHz typical (RT programmable 200 kHz to 2 MHz) |
| Suhu Hubung Kerja | — | -40 C to +125 C (E grade) / 0 C to +125 C (specified) |
| EN/UVLO Pin | — | Yes (combined enable + accurate undervoltage lockout) |
| Control Architecture | — | Constant-frequency peak current mode |