LT8364HMSE#PBF vs LT8364EMSE Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng LT8364HMSE#PBF sa pamamagitan ng Analog Devices at LT8364EMSE sa pamamagitan ng Analog Devices. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Analog Devices
LT8364HMSE#PBF - 60V, 4A Boost/SEPIC/Inverting DC/DC Converter | ADI
LT8364HMSE#PBF ✓ NakahandaAnalog Devices
LT8364EMSE - 60V 4A Boost/SEPIC/Inverting Converter | Analog Devices
LT8364EMSE ✓ NakahandaPagsanggunian na paghahambing
| Parametro | LT8364HMSE#PBF | LT8364EMSE |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Kategorya | DC-DC Converters | DC-DC Converters |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Topolohiya | Boost, SEPIC, Inverting | Boost, SEPIC, or Inverting (selectable via single FB pin) |
| Hanay ng Voltage ng Input | 2.8 V to 60 V | 2.8 V to 60 V |
| Switch Current Rating | 4 A peak | 4 A peak |
| Switch Voltage Rating | 60 V | 60 V maximum |
| Output Voltage Range (Boost/SEPIC) | 1.6 V to 60 V | — |
| Output Kumpigurasyon | Positive fixed (single output) | — |
| Takbo ng Pagpipili | 1.4 MHz to 2 MHz (programmable via RT) | — |
| Default Switching Frequency | 2 MHz | — |
| Quiescent Current (Burst Mode) | 9 µA | 9 uA typical |
| Typical Output Ripple | < 15 mV | — |
| Control Mode | Current-mode | — |
| Feedback Pin | Single FB (positive or negative feedback) | — |
| Hanay ng Temperature ng Junction na Operasyon | -40 °C to +150 °C (H grade) | — |
| Packhaging | 12-lead MSOP with exposed pad (MSE) | 16-pin MSOP (12-lead) with Exposed Pad (MSE), 3.00 mm body width |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Level ng MSL | 1 | 1 (per JEDEC J-STD-020, unlimited floor life) |
| Tindminan RoHS | Compliant (Pb-free #PBF suffix) | Compliant |
| Soft-Start | Internal | — |
| Thermal Shutdown | Yes (internal) | — |
| Hanay ng Output Volte | — | 1.6 V to 60 V (boost/SEPIC); negative in inverting |
| Output Ripple (Burst Mode) | — | 15 mV typical |
| Internal Oscillator Frequency | — | 2 MHz typical (RT programmable 200 kHz to 2 MHz) |
| Temperature ng Junction na Operasyon | — | -40 C to +125 C (E grade) / 0 C to +125 C (specified) |
| EN/UVLO Pin | — | Yes (combined enable + accurate undervoltage lockout) |
| Control Architecture | — | Constant-frequency peak current mode |