MAX1231ACEG+ vs MAX1231ACEG+T Perbandingan
Perbandingan bersamaan detil MAX1231ACEG+ dari Maxim Integrated dan MAX1231ACEG+T dari Analog Devices. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Maxim Integrated
MAX1231ACEG+ - 12-Bit 300ksps 16-Ch SAR ADC | Maxim Integrated
MAX1231ACEG+ ✓ Aktif
Perbandingan Spesifikasi
| Parameter Umum | MAX1231ACEG+ | MAX1231ACEG+T |
|---|---|---|
| Merek | Maxim Integrated | Analog Devices |
| Kategori | ADC/DAC | ADC/DAC |
| Status Lingkungan Hidup | Aktif | Aktif |
| Resolusi | 12 bit | 12 bit |
| Sample Rate | 300 ksps | — |
| Number of Input Channels | 8 / 16 (selectable) | 8 or 16 single-ended (4 or 8 differential) |
| Input Configuration | Single-ended / pseudo-differential | — |
| Conversion Architecture | SAR (Successive Approximation) | — |
| Analog Supply Voltage (AVDD) | 3.0 V to 3.6 V | — |
| Digital Supply Voltage (DVDD) | 2.7 V to VAVDD | — |
| Arus Pemuat | [DATA_NEEDED: AVDD + DVDD current] | — |
| Internal Reference | 2.5 V | — |
| External Reference Range | 1.0 V to AVDD | 1.0 V to VDD |
| Integral Nonlinearity (INL) | ±1 LSB (max) | — |
| Differential Nonlinearity (DNL) | ±1 LSB (max, no missing codes) | — |
| Signal-to-Noise + Distortion (SINAD) | [DATA_NEEDED: SINAD at 100 kHz input] | — |
| Internal FIFO Depth | 16 conversions | — |
| Sensor Suhu Internal | Yes (±1 °C typical accuracy) | — |
| Serial Interface | SPI / QSPI / MICROWIRE-compatible | — |
| Maximum SCLK Frequency | 10 MHz | — |
| Input Fault Tolerance | ±6 V (clamped, no latch-up) | — |
| Paket | 24-QSOP (EG) | 24-pin QSOP |
| Rentang Suhu Kerja | 0 °C to +70 °C (commercial, C grade) | 0 °C to +70 °C (commercial, C-grade) |
| Tipe Mounting | Surface Mount | Surface Mount |
| MSL Sensitivity Level | [DATA_NEEDED: MSL level] | — |
| Status RoHS | Compliant | Compliant |
| Laju Pengambilan Sampel | — | 300 ksps |
| Architecture | — | SAR (Successive Approximation Register) |
| Input Type | — | Single-Ended / Differential (software configurable) |
| Data Interface | — | SPI / QSPI / MICROWIRE-compatible serial |
| Tegangan Pemuat | — | 3 V or 3.3 V nominal |
| Supply Current (operating, 300 ksps) | — | 1.6 mA (typ) |
| Internal Reference Voltage | — | 2.5 V (A-grade) |
| Rentang Tegangan Masukan | — | 0 to VREF / ±VREF / 0 to 2×VREF / ±2×VREF |
| Internal FIFO | — | 16 entries |
| Internal Temperature Sensor Accuracy | — | ±1 °C |
| Linearity Error (INL) | — | ±1 LSB (max) |