MAX3232EEAE+TG1Z vs MAX3232ECDB Perbandingan
Perbandingan bersamaan detil MAX3232EEAE+TG1Z dari Analog Devices dan MAX3232ECDB dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Analog Devices
MAX3232EEAE+TG1Z - 1Mbps RS-232 Transceiver | Analog Devices
MAX3232EEAE+TG1Z ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | MAX3232EEAE+TG1Z | MAX3232ECDB |
|---|---|---|
| Merek | Analog Devices | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | RS-232 transceiver | — |
| Driver Count | 2 | — |
| Receiver Count | 2 | — |
| Operating Modes | Full duplex | — |
| Supply Voltage Range | 3.0 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 1 Mbps | — |
| ESD Protection | ±15 kV | — |
| Shutdown Supply Current | Down to 10 nA | — |
| Interface Standard | True RS-232 | — |
| Paket | 16-pin SSOP | 16-SSOP (DB, 0.209 in / 5.30 mm width) |
| Tipe Mounting | Surface mount | Surface Mount |
| Supply Type | Single supply | — |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | — |
| Driver Output Voltage | [DATA_NEEDED: RS-232 driver output voltage] | — |
| Receiver Input Threshold | [DATA_NEEDED: RS-232 receiver input threshold] | — |
| Channel Separation | [DATA_NEEDED: channel separation] | — |
| Charge-Pump Capacitors | [DATA_NEEDED: charge-pump capacitor values] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Protocol | — | RS-232 |
| Type | — | Transceiver |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| Laju Data | — | 250 kbps (minimum) |
| ESD Protection (RS-232 Bus Pins) | — | ±15 kV (HBM) |
| ESD Protection (IEC 61000-4-2) | — | ±15 kV contact discharge / ±15 kV air-gap discharge |
| Standard Compliance | — | TIA/EIA-232-F |
| Suhu Kerja | — | 0C to +70C |
| Packaging | — | Tube |
| External Capacitors Required | — | 4 x 0.1 uF (charge pump) |
| Lead Free Status | — | [DATA_NEEDED: lead free status] |