MAX3232EEAE+TG1Z vs MAX3232ECDB So sánh

So sánh chi tiết song song của MAX3232EEAE+TG1Z bằng Analog Devices và MAX3232ECDB bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
MAX3232EEAE+TG1Z MAX3232EEAE+TG1Z - 1Mbps RS-232 Transceiver | Analog Devices

MAX3232EEAE+TG1Z - 1Mbps RS-232 Transceiver | Analog Devices

MAX3232EEAE+TG1Z ✓ Hoạt động
Texas Instruments
MAX3232ECDB MAX3232ECDB - RS-232 Transceiver 3-5.5V ±15kV ESD | TI

MAX3232ECDB - RS-232 Transceiver 3-5.5V ±15kV ESD | TI

MAX3232ECDB ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MAX3232EEAE+TG1Z MAX3232ECDB
Thương hiệu Analog Devices Texas Instruments
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type RS-232 transceiver —
Driver Count 2 —
Receiver Count 2 —
Operating Modes Full duplex —
Supply Voltage Range 3.0 V to 5.5 V 3 V to 5.5 V
Maximum Data Rate 1 Mbps —
ESD Protection ±15 kV —
Shutdown Supply Current Down to 10 nA —
Interface Standard True RS-232 —
Hộp 16-pin SSOP 16-SSOP (DB, 0.209 in / 5.30 mm width)
Kiểu lắp đặt Surface mount Surface Mount
Supply Type Single supply —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] —
Driver Output Voltage [DATA_NEEDED: RS-232 driver output voltage] —
Receiver Input Threshold [DATA_NEEDED: RS-232 receiver input threshold] —
Channel Separation [DATA_NEEDED: channel separation] —
Charge-Pump Capacitors [DATA_NEEDED: charge-pump capacitor values] —
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] —
Protocol — RS-232
Type — Transceiver
Number of Drivers — 2
Number of Receivers — 2
Tốc độ dữ liệu — 250 kbps (minimum)
ESD Protection (RS-232 Bus Pins) — ±15 kV (HBM)
ESD Protection (IEC 61000-4-2) — ±15 kV contact discharge / ±15 kV air-gap discharge
Standard Compliance — TIA/EIA-232-F
Nhiệt độ hoạt động — 0C to +70C
Packaging — Tube
External Capacitors Required — 4 x 0.1 uF (charge pump)
Lead Free Status — [DATA_NEEDED: lead free status]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá