MCZ33989EG vs MCZ33742SEG Perbandingan
Perbandingan bersamaan detil MCZ33989EG dari NXP Semiconductors dan MCZ33742SEG dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | MCZ33989EG | MCZ33742SEG |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Voltage Regulators | Power Management |
| Status Lingkungan Hidup | Aktif | Aktif |
| Fungsi | System Basis Chip with HS-CAN Transceiver | System Basis Chip with HS-CAN Transceiver & 5.0 V LDO |
| Antarmuka | CAN, SPI | — |
| Supply Voltage (VSUP) | [DATA_NEEDED: VSUP operating range] | — |
| Number of Voltage Regulators | 2 | — |
| CAN Data Rate | Up to 1 Mbaud | 1.0 Mbps (CAN 2.0A/B compliant, ISO 11898-5) |
| Wake-up Inputs | 4 high-voltage inputs | — |
| SPI Interface | Yes (MCU configuration and status) | — |
| VSUP Monitoring | Undervoltage/overvoltage fault detection | — |
| Jumlah Pin | 28 | — |
| Paket | 28-SOIC (0.295 inch, 7.50 mm width) | 28-SOIC (0.295" / 7.50 mm width) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Packaging | Tube | Tube |
| Lead Free Status | Lead Free | — |
| Status RoHS | RoHS Compliant | Compliant |
| Target Application | Automotive Engine Control Unit (ECU) | — |
| Supply Voltage (VCC) | — | 5.5 V to 18 V (5.5 V–27 V tolerant, 40 V load-dump rated) |
| Supply Current (typ) | — | 42 mA |
| SPI Control Frequency | — | up to 4.0 MHz |
| On-board LDO Output Voltage | — | 5.0 V (fixed) |
| LDO Current Limit | — | Yes (with current limiting) |
| Overtemperature Prewarning | — | Yes |
| Reset Output | — | Yes (LDO output monitoring & reset) |
| Output Drive Type | — | High-side drive with sense input |
| Bus Diagnostic | — | TXD dominant timeout, bus-fault detection |
| Suhu Kerja | — | -40 °C to +125 °C |