MCZ33989EG vs MCZ33742SEG Karşılaştırma
Ayrıntılı yan yana karşılaştırma MCZ33989EG tarafından NXP Semiconductors ve MCZ33742SEG tarafından NXP SemiconductorsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | MCZ33989EG | MCZ33742SEG |
|---|---|---|
| Marka | NXP Semiconductors | NXP Semiconductors |
| Kategori | Voltage Regulators | Power Management |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Fonksiyon | System Basis Chip with HS-CAN Transceiver | System Basis Chip with HS-CAN Transceiver & 5.0 V LDO |
| Arayüz | CAN, SPI | — |
| Supply Voltage (VSUP) | [DATA_NEEDED: VSUP operating range] | — |
| Number of Voltage Regulators | 2 | — |
| CAN Data Rate | Up to 1 Mbaud | 1.0 Mbps (CAN 2.0A/B compliant, ISO 11898-5) |
| Wake-up Inputs | 4 high-voltage inputs | — |
| SPI Interface | Yes (MCU configuration and status) | — |
| VSUP Monitoring | Undervoltage/overvoltage fault detection | — |
| Pin Sayısı | 28 | — |
| Paket | 28-SOIC (0.295 inch, 7.50 mm width) | 28-SOIC (0.295" / 7.50 mm width) |
| Montaj Türü | Surface Mount | Surface Mount |
| Packaging | Tube | Tube |
| Lead Free Status | Lead Free | — |
| RoHS Durumu | RoHS Compliant | Compliant |
| Target Application | Automotive Engine Control Unit (ECU) | — |
| Supply Voltage (VCC) | — | 5.5 V to 18 V (5.5 V–27 V tolerant, 40 V load-dump rated) |
| Supply Current (typ) | — | 42 mA |
| SPI Control Frequency | — | up to 4.0 MHz |
| On-board LDO Output Voltage | — | 5.0 V (fixed) |
| LDO Current Limit | — | Yes (with current limiting) |
| Overtemperature Prewarning | — | Yes |
| Reset Output | — | Yes (LDO output monitoring & reset) |
| Output Drive Type | — | High-side drive with sense input |
| Bus Diagnostic | — | TXD dominant timeout, bus-fault detection |
| İşletim Sıcaklığı | — | -40 °C to +125 °C |