MK64FX512VMD12 vs MK60FN1M0VMD12 Perbandingan
Perbandingan bersamaan detil MK64FX512VMD12 dari NXP Semiconductors dan MK60FN1M0VMD12 dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
NXP Semiconductors
MK64FX512VMD12 - 120MHz ARM Cortex-M4 MCU 512KB Flash | NXP
MK64FX512VMD12 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | MK64FX512VMD12 | MK60FN1M0VMD12 |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Microcontrollers | Microcontrollers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Core Architecture | ARM Cortex-M4 with FPU + DSP | ARM Cortex-M4F (with FPU + DSP) |
| Frekuensi Bawah Maximum | 120 MHz | — |
| Program Flash | 512 KB | 1 MB (1024 KB) |
| SRAM | 256 KB | 128 KB |
| Supply Voltage Range | 1.71 V to 3.6 V | — |
| Rentang Suhu Kerja | -40 C to +105 C (VMD industrial grade) | — |
| Paket | 144-MAPBGA 13x13 mm | 144-MAPBGA 13x13 mm |
| Tipe Mounting | Surface Mount (BGA) | Surface Mount (BGA) |
| ADC | 16-bit, up to 24 single-ended channels | — |
| DAC | 12-bit | 12-bit DAC |
| Communication Interfaces | USB 2.0 FS OTG, 10/100 Ethernet MAC, 2x CAN 2.0B, 3x SPI, 3x UART, 2x I2C, I2S | — |
| Timer Modules | 4x 32-bit FlexTimer, 2x 16-bit low-power timer, RTC | — |
| Internal Voltage Regulator | 1.2 V core LDO (VCAP pin) | — |
| Level MSL | 3 (per JEDEC J-STD-020) | — |
| Status RoHS | Compliant | Compliant |
| CPU Maximum Frequency | — | 120 MHz |
| FlexMemory / EEPROM Emulation | — | Yes (256 KB FlexNVM, partitionable) |
| Operating Voltage Range | — | 1.71 V to 3.6 V |
| Suhu Kerja | — | -40C to +105C (Industrial) |
| USB | — | USB 2.0 Full-Speed OTG + USB 2.0 High-Speed (with integrated PHY) |
| Ethernet | — | 10/100 Mbps MAC with IEEE 1588 (MII/RMII interface to external PHY) |
| SAR ADC | — | 16-bit, dual ADC, up to 24 channels |
| Timers | — | FlexTimer (FTM) modules; PDB; LPIT |
| Communication Peripherals | — | 3x UART, 2x CAN (FlexCAN), 3x SPI, 3x I2C, I2S |
| External Bus | — | FlexBus + SDRAM controller |
| Low-Power Modes | — | VLLS0/1/3, LLS, VLPR, RUN modes (~200 uA/MHz typical) |
| Security | — | Hardware CRC, tamper detect, unique 80-bit device ID |
| Lead-Free | — | Yes |