MK64FX512VMD12 vs MK60FN1M0VMD12 Karşılaştırma
Ayrıntılı yan yana karşılaştırma MK64FX512VMD12 tarafından NXP Semiconductors ve MK60FN1M0VMD12 tarafından NXP SemiconductorsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
NXP Semiconductors
MK64FX512VMD12 - 120MHz ARM Cortex-M4 MCU 512KB Flash | NXP
MK64FX512VMD12 ✓ AktifÖzellik Karşılaştırması
| Parametre | MK64FX512VMD12 | MK60FN1M0VMD12 |
|---|---|---|
| Marka | NXP Semiconductors | NXP Semiconductors |
| Kategori | Microcontrollers | Microcontrollers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Core Architecture | ARM Cortex-M4 with FPU + DSP | ARM Cortex-M4F (with FPU + DSP) |
| Azami Saat Hızı | 120 MHz | — |
| Program Flash | 512 KB | 1 MB (1024 KB) |
| SRAM | 256 KB | 128 KB |
| Supply Voltage Range | 1.71 V to 3.6 V | — |
| İşletim Sıcaklığı Aralığı | -40 C to +105 C (VMD industrial grade) | — |
| Paket | 144-MAPBGA 13x13 mm | 144-MAPBGA 13x13 mm |
| Montaj Türü | Surface Mount (BGA) | Surface Mount (BGA) |
| ADC | 16-bit, up to 24 single-ended channels | — |
| DAC | 12-bit | 12-bit DAC |
| Communication Interfaces | USB 2.0 FS OTG, 10/100 Ethernet MAC, 2x CAN 2.0B, 3x SPI, 3x UART, 2x I2C, I2S | — |
| Timer Modules | 4x 32-bit FlexTimer, 2x 16-bit low-power timer, RTC | — |
| Internal Voltage Regulator | 1.2 V core LDO (VCAP pin) | — |
| MSL Seviyesi | 3 (per JEDEC J-STD-020) | — |
| RoHS Durumu | Compliant | Compliant |
| CPU Maximum Frequency | — | 120 MHz |
| FlexMemory / EEPROM Emulation | — | Yes (256 KB FlexNVM, partitionable) |
| Operating Voltage Range | — | 1.71 V to 3.6 V |
| İşletim Sıcaklığı | — | -40C to +105C (Industrial) |
| USB | — | USB 2.0 Full-Speed OTG + USB 2.0 High-Speed (with integrated PHY) |
| Ethernet | — | 10/100 Mbps MAC with IEEE 1588 (MII/RMII interface to external PHY) |
| SAR ADC | — | 16-bit, dual ADC, up to 24 channels |
| Timers | — | FlexTimer (FTM) modules; PDB; LPIT |
| Communication Peripherals | — | 3x UART, 2x CAN (FlexCAN), 3x SPI, 3x I2C, I2S |
| External Bus | — | FlexBus + SDRAM controller |
| Low-Power Modes | — | VLLS0/1/3, LLS, VLPR, RUN modes (~200 uA/MHz typical) |
| Security | — | Hardware CRC, tamper detect, unique 80-bit device ID |
| Lead-Free | — | Yes |