MMA1250D vs MMA1200D Perbandingan
Perbandingan bersamaan detil MMA1250D dari NXP Semiconductors dan MMA1200D dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
NXP Semiconductors
MMA1200D - ±281g Z-Axis Accelerometer | NXP SOIC-16
MMA1200D ⚠ Waktu Beli TerakhirPerbandingan Spesifikasi
| Parameter Umum | MMA1250D | MMA1200D |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Motion Sensors | Motion Sensors |
| Status Lingkungan Hidup | Obsolete | Waktu Pembelian Terakhir |
| Tipe Pengukur | Accelerometer, Z-axis single-axis | Accelerometer, Z-axis |
| Acceleration Range | ±5 g | — |
| Axis | Z (vertical / out-of-plane) | Z (single) |
| Sensing Technology | Capacitive MEMS (silicon micromachined) | — |
| Tipe Output | Analog, ratiometric voltage | Analog voltage |
| Supply Voltage (VDD) | 4.75 V to 5.25 V | — |
| Sensitivity (nominal) | [DATA_NEEDED: sensitivity V/g] | — |
| Zero-g Offset (nominal) | 2.5 V (at VDD = 5 V, ratiometric) | — |
| Filter Type | On-chip 2-pole low-pass filter | 4-pole low-pass (Butterworth) |
| Filter Cut-off Frequency (-3 dB) | 50 Hz | — |
| Self-Test | Yes - system-level, logic input | Yes (electromechanical) |
| Rentang Suhu Kerja | -40 °C to +105 °C | — |
| Paket | 16-pin SOIC (SOP-16), surface mount | 16-pin SOIC |
| Tipe Mounting | Surface Mount | Surface Mount |
| Level MSL | [DATA_NEEDED: MSL rating] | — |
| Status RoHS | Non-Compliant (contains lead, per DigiChip listing) | Non-Compliant (contains lead) |
| Lead-Free Status | Contains Lead | — |
| Temperature Grade | Automotive | — |
| Dampak Pengukuran | — | ±281 g |
| Tegangan Pemuat | — | 5.0 V nominal |
| Sensitivity | — | [DATA_NEEDED: sensitivity mV/g] |
| Zero-g Output | — | Approximately 2.5 V (ratiometric) |
| Bandwidth | — | 400 Hz (factory-set 4-pole LPF cutoff) |
| Suhu Kerja | — | -40C to +125C |
| Technology | — | Capacitive MEMS, surface micromachined |