MMA1270KEG vs MMA1260KEG Perbandingan
Perbandingan bersamaan detil MMA1270KEG dari NXP Semiconductors dan MMA1260KEG dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
NXP Semiconductors
MMA1270KEG - ±2.5g Z-Axis Micromachined Accelerometer | NXP | SOIC-16
MMA1270KEG ObsoletePerbandingan Spesifikasi
| Parameter Umum | MMA1270KEG | MMA1260KEG |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Motion Sensors | Motion Sensors |
| Status Lingkungan Hidup | Obsolete | NRND |
| Tipe Pengukur | Accelerometer, single-axis (Z axis) | Accelerometer, single-axis analog |
| Dampak Pengukuran | ±2.5 g | ±1.5 g |
| Tipe Output | Analog voltage (ratiometric) | Analog, ratiometric |
| Sensitivity | 712.5 mV/g to 787.5 mV/g | [DATA_NEEDED: sensitivity in mV/g] |
| Supply Voltage (VDD) | 4.75 V to 5.25 V | — |
| Arus Pemuat | [DATA_NEEDED: typical supply current in mA] | 5.0 mA (typ) |
| Zero-g Output Voltage (typ) | 2.5 V at VDD = 5 V | — |
| Bandwidth (Low-Pass Filter) | 50 Hz (two-pole) | — |
| Self-Test Input | Yes (logic-level, active high) | — |
| Temperature Compensation | On-chip | On-chip factory-calibrated |
| Rentang Suhu Kerja | -40 °C to +85 °C | -40 °C to +85 °C |
| Paket / Case | 16-pin SOIC (KEG suffix), tube | — |
| Tipe Mounting | Surface Mount | Surface Mount |
| Axis | Z-axis (perpendicular to PCB) | — |
| Technology | Capacitive MEMS, surface micromachined | Micromachined silicon capacitive MEMS |
| Status RoHS | [DATA_NEEDED: RoHS compliance status] | Compliant |
| Tegangan Pemuat | — | 5.0 V (typ) |
| Zero-g Output Voltage | — | 2.5 V nominal at Vdd = 5.0 V |
| Filter | — | 2-pole low-pass, factory-set cutoff |
| Self-Test | — | Yes (logic-level activation) |
| Paket | — | 16-pin SOIC (SOP-16 / K suffix) |
| Sensitivity Drift over Temperature | — | [DATA_NEEDED: %FS/°C] |
| Bandwidth | — | [DATA_NEEDED: Hz] |