MMA2244KEGR2 vs MMA2244KEG Perbandingan
Perbandingan bersamaan detil MMA2244KEGR2 dari NXP Semiconductors dan MMA2244KEG dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
NXP Semiconductors
MMA2244KEG - ±22.5g X-Axis Analog Accelerometer | NXP
MMA2244KEG ⚠ Waktu Beli TerakhirPerbandingan Spesifikasi
| Parameter Umum | MMA2244KEGR2 | MMA2244KEG |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Motion Sensors | Motion Sensors |
| Status Lingkungan Hidup | Aktif | Waktu Pembelian Terakhir |
| Tipe Pengukur | Accelerometer, single-axis (X) | Accelerometer, single-axis (X) |
| Axis Count | 1 (X-axis) | — |
| Dampak Pengukuran | ±20 g (full-scale trim ±22.5 g) | — |
| Sensitivity (typ.) | [DATA_NEEDED: exact V/g value] | — |
| Tipe Output | Analog, ratiometric | Analog, ratiometric voltage |
| Output at 0 g (typ.) | 2.5 V (VDD/2) | — |
| Bandwidth | 400 Hz | 400 Hz (4-pole low-pass filter, factory set) |
| Supply Voltage (VDD) | 4.75 V to 5.25 V (5 V nominal) | — |
| Supply Current (typ.) | [DATA_NEEDED: quiescent current in mA] | — |
| Self-Test | Yes (active-high logic input) | Yes (ST pin) |
| On-Chip Filter | 4-pole low-pass filter | — |
| Temperature Compensation | Internal, factory-trimmed | On-chip, factory calibrated |
| Suhu Kerja | -40 °C to +125 °C | — |
| Paket | 16-SOIC (SOP-16, 150 mil) | 16-SOIC (208 mil, SOW-16) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Level MSL | [DATA_NEEDED: MSL rating] | — |
| Status RoHS | Compliant (per DigiKey listing) | — |
| Automotive Grade | Yes (automotive temperature grade -40 to +125 °C) | — |
| Technology | — | Surface-micromachined capacitive (g-cell) + CMOS ASIC |
| Axis | — | X (single) |
| Full-Scale Range | — | ±22.5 g |
| Tegangan Pemuat | — | 5.0 V (typical, ratiometric) |
| Sensitivity | — | 167 mV/g (typical at 5 V) |
| Zero-g Offset | — | 2.5 V nominal (ratiometric) |
| Rentang Suhu Kerja | — | -40 °C to +85 °C (automotive grade) |
| Filter | — | 4-pole low-pass, factory-set cutoff |