MMA6233QR2 vs MMA6261QR2 Perbandingan
Perbandingan bersamaan detil MMA6233QR2 dari NXP Semiconductors dan MMA6261QR2 dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
NXP Semiconductors
MMA6233QR2 - ±10g Dual-Axis Micromachined Accelerometer | NXP
MMA6233QR2 ObsoletePerbandingan Spesifikasi
| Parameter Umum | MMA6233QR2 | MMA6261QR2 |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Motion Sensors | Motion Sensors |
| Status Lingkungan Hidup | Obsolete | Obsolete |
| Tipe Pengukur | Accelerometer, Dual-Axis (X, Y) | Accelerometer, dual-axis (X, Y) |
| Full-Scale Range | ±10g (±6g via g-select) | — |
| Sensitivity | 120 mV/g (typical at 3.3V Vdd, [DATA_NEEDED: sensitivity tolerance]) | factory-set, ratiometric |
| Tipe Output | Analog, ratiometric | Analog voltage, ratiometric |
| Output Voltage at 0g | VDD/2 | — |
| Bandwidth | 900 Hz (maximum) | 300 Hz |
| Supply Voltage (VDD) | 3.0 V to 5.25 V | 2.7 V to 3.6 V |
| Arus Pemuat | 2.5 mA (typical, [DATA_NEEDED: max]) | 1.5 mA (typical) |
| Suhu Kerja | -20C to +85C | -20 C to +85 C |
| Tetesan Bising | [DATA_NEEDED: noise density] | — |
| Nonlinearity | [DATA_NEEDED: nonlinearity %FS] | — |
| Self-Test | Yes (active-high logic input) | Yes (per axis) |
| g-Select Input | Yes (±10g or ±6g selection) | — |
| Paket | 16-pin QFN-EP (6x6 mm) | 16-QFN-EP (6x6 mm) HQCCN |
| Tipe Mounting | Surface Mount | Surface Mount |
| Filter Type | 1-pole low-pass (factory-set cut-off) | — |
| Status RoHS | Compliant | RoHS Compliant (contains lead, lead-free terminal finish) |
| Lead-Free Status | Contains Lead (NXP datasheet note) | — |
| Level MSL | [DATA_NEEDED: MSL rating] | — |
| Sensing Technology | — | Capacitive MEMS |
| Acceleration Range | — | ±1.5 g |
| Number of Axes | — | 2 (X, Y) |
| Zero-g Offset | — | factory-set |
| Filter | — | 1-pole low-pass, factory-set |
| Jumlah Pin | — | 16 |