MPVZ5004G7U vs MPVZ5010G7U Perbandingan
Perbandingan bersamaan detil MPVZ5004G7U dari STMicroelectronics dan MPVZ5010G7U dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
NXP Semiconductors
MPVZ5010G7U - 10 kPa Vented Gauge Pressure Sensor, 8-DIP | NXP
MPVZ5010G7U ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | MPVZ5004G7U | MPVZ5010G7U |
|---|---|---|
| Merek | STMicroelectronics | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Aktif |
| Pressure Type | Vented Gauge | Vented Gauge |
| Operating Pressure Range | 0 kPa to 3.92 kPa (0 to 0.57 PSI) | 0 kPa to 10 kPa (0 to 1.45 PSI) |
| Tegangan Pemuat | 4.75 V to 5.25 V (5 V typical) | — |
| Rentang Tegangan Output | 1.0 V to 4.9 V (ratiometric) | — |
| Tipe Output | Analog Voltage (ratiometric) | Analog, ratiometric to Vcc |
| Sensitivity | 1.0 V/kPa (typical, ratiometric to 5 V) | — |
| Suhu Kerja | 0C to +85C | — |
| Accuracy (Linearity) | +/-1.5% of full-scale span (typical) | — |
| Paket / Case | 8-DIP Module (axial port) | — |
| Tipe Mounting | Through-Hole | Through-Hole (DIP module with vent tube) |
| Port Style | Axial pressure port with vent | — |
| Output Impedance | [DATA_NEEDED: output impedance] | — |
| Response Time | [DATA_NEEDED: response time] | [DATA_NEEDED: response time ms] |
| Pressure Port | Vented gauge (back-side referenced to ambient) | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Moisture Sensitivity | Non-condensing environments only | — |
| Supply Voltage (Vcc) | — | 4.75 V to 5.25 V (5 V typical) |
| Arus Pemuat | — | 10 mA (maximum) |
| Analog Output Range | — | 0.2 V to 4.7 V |
| Accuracy | — | ±1.5 %FS (0 °C to 85 °C) |
| Rentang Suhu Kerja | — | 0 °C to +85 °C |
| Compensated Temperature Range | — | -10 °C to +60 °C |
| Storage Temperature Range | — | -30 °C to +100 °C [DATA_NEEDED: confirm exact storage spec] |
| Paket | — | 8-DIP Module (Case 1368-01, through-hole) |
| Sensor Technology | — | Piezoresistive silicon micromachined |
| Signal Conditioning | — | On-chip, temperature compensated, calibrated |
| Level MSL | — | [DATA_NEEDED: MSL rating] |
| Body Height | — | 5.46 mm |