MPVZ5010G7U vs MP3V5010GVP Perbandingan
Perbandingan bersamaan detil MPVZ5010G7U dari NXP Semiconductors dan MP3V5010GVP dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
NXP Semiconductors
MPVZ5010G7U - 10 kPa Vented Gauge Pressure Sensor, 8-DIP | NXP
MPVZ5010G7U ✓ Aktif
Perbandingan Spesifikasi
| Parameter Umum | MPVZ5010G7U | MP3V5010GVP |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Aktif |
| Pressure Type | Vented Gauge | Vented Gauge |
| Operating Pressure Range | 0 kPa to 10 kPa (0 to 1.45 PSI) | — |
| Supply Voltage (Vcc) | 4.75 V to 5.25 V (5 V typical) | — |
| Arus Pemuat | 10 mA (maximum) | — |
| Analog Output Range | 0.2 V to 4.7 V | — |
| Accuracy | ±1.5 %FS (0 °C to 85 °C) | 5% (0 to 85 C) |
| Tipe Output | Analog, ratiometric to Vcc | Analog Voltage (ratiometric) |
| Response Time | [DATA_NEEDED: response time ms] | — |
| Rentang Suhu Kerja | 0 °C to +85 °C | — |
| Compensated Temperature Range | -10 °C to +60 °C | — |
| Storage Temperature Range | -30 °C to +100 °C [DATA_NEEDED: confirm exact storage spec] | — |
| Paket | 8-DIP Module (Case 1368-01, through-hole) | SOP-8 (Case 1368-01), 8-SMD Module |
| Tipe Mounting | Through-Hole (DIP module with vent tube) | Surface Mount |
| Sensor Technology | Piezoresistive silicon micromachined | — |
| Signal Conditioning | On-chip, temperature compensated, calibrated | — |
| Level MSL | [DATA_NEEDED: MSL rating] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| Body Height | 5.46 mm | — |
| Pressure Range | — | 0 kPa to 10 kPa (0 to 1.45 PSI) |
| Rentang Tegangan Output | — | 0.1 V to 3.1 V |
| Tegangan Pemuat | — | 2.7 V to 3.3 V (3 V nominal) |
| Sensitivity | — | 0.2 V/kPa nominal |
| Suhu Kerja | — | -40 C to +125 C |
| Storage Temperature | — | -40 C to +125 C |
| Port Configuration | — | Vertical bottom-port male tube, 0.13" (3.17 mm) |
| Automotive Qualification | — | AEC-Q100 |
| Packaging | — | Tray |