MPVZ5010G7U vs MPVZ5004G7U Perbandingan
Perbandingan bersamaan detil MPVZ5010G7U dari NXP Semiconductors dan MPVZ5004G7U dari STMicroelectronics. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
NXP Semiconductors
MPVZ5010G7U - 10 kPa Vented Gauge Pressure Sensor, 8-DIP | NXP
MPVZ5010G7U ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | MPVZ5010G7U | MPVZ5004G7U |
|---|---|---|
| Merek | NXP Semiconductors | STMicroelectronics |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Aktif |
| Pressure Type | Vented Gauge | Vented Gauge |
| Operating Pressure Range | 0 kPa to 10 kPa (0 to 1.45 PSI) | 0 kPa to 3.92 kPa (0 to 0.57 PSI) |
| Supply Voltage (Vcc) | 4.75 V to 5.25 V (5 V typical) | — |
| Arus Pemuat | 10 mA (maximum) | — |
| Analog Output Range | 0.2 V to 4.7 V | — |
| Accuracy | ±1.5 %FS (0 °C to 85 °C) | — |
| Tipe Output | Analog, ratiometric to Vcc | Analog Voltage (ratiometric) |
| Response Time | [DATA_NEEDED: response time ms] | [DATA_NEEDED: response time] |
| Rentang Suhu Kerja | 0 °C to +85 °C | — |
| Compensated Temperature Range | -10 °C to +60 °C | — |
| Storage Temperature Range | -30 °C to +100 °C [DATA_NEEDED: confirm exact storage spec] | — |
| Paket | 8-DIP Module (Case 1368-01, through-hole) | — |
| Tipe Mounting | Through-Hole (DIP module with vent tube) | Through-Hole |
| Sensor Technology | Piezoresistive silicon micromachined | — |
| Signal Conditioning | On-chip, temperature compensated, calibrated | — |
| Level MSL | [DATA_NEEDED: MSL rating] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| Body Height | 5.46 mm | — |
| Tegangan Pemuat | — | 4.75 V to 5.25 V (5 V typical) |
| Rentang Tegangan Output | — | 1.0 V to 4.9 V (ratiometric) |
| Sensitivity | — | 1.0 V/kPa (typical, ratiometric to 5 V) |
| Suhu Kerja | — | 0C to +85C |
| Accuracy (Linearity) | — | +/-1.5% of full-scale span (typical) |
| Paket / Case | — | 8-DIP Module (axial port) |
| Port Style | — | Axial pressure port with vent |
| Output Impedance | — | [DATA_NEEDED: output impedance] |
| Pressure Port | — | Vented gauge (back-side referenced to ambient) |
| Moisture Sensitivity | — | Non-condensing environments only |