MPVZ5010G7U vs MPVZ5004G7U Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci MPVZ5010G7U disebabkan oleh NXP Semiconductors dan MPVZ5004G7U disebabkan oleh STMicroelectronics. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
NXP Semiconductors
MPVZ5010G7U - 10 kPa Vented Gauge Pressure Sensor, 8-DIP | NXP
MPVZ5010G7U ✓ AktifPengandingan Spesifikasi
| Parametr | MPVZ5010G7U | MPVZ5004G7U |
|---|---|---|
| Merek | NXP Semiconductors | STMicroelectronics |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Aktif |
| Pressure Type | Vented Gauge | Vented Gauge |
| Operating Pressure Range | 0 kPa to 10 kPa (0 to 1.45 PSI) | 0 kPa to 3.92 kPa (0 to 0.57 PSI) |
| Supply Voltage (Vcc) | 4.75 V to 5.25 V (5 V typical) | — |
| Arus Pemberi Arus | 10 mA (maximum) | — |
| Analog Output Range | 0.2 V to 4.7 V | — |
| Accuracy | ±1.5 %FS (0 °C to 85 °C) | — |
| Jenis Output | Analog, ratiometric to Vcc | Analog Voltage (ratiometric) |
| Response Time | [DATA_NEEDED: response time ms] | [DATA_NEEDED: response time] |
| Gambaran Suhu Operasi | 0 °C to +85 °C | — |
| Compensated Temperature Range | -10 °C to +60 °C | — |
| Storage Temperature Range | -30 °C to +100 °C [DATA_NEEDED: confirm exact storage spec] | — |
| Kemasan | 8-DIP Module (Case 1368-01, through-hole) | — |
| Jenis Pemasangan | Through-Hole (DIP module with vent tube) | Through-Hole |
| Sensor Technology | Piezoresistive silicon micromachined | — |
| Signal Conditioning | On-chip, temperature compensated, calibrated | — |
| Aras MSL | [DATA_NEEDED: MSL rating] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| Body Height | 5.46 mm | — |
| Tegangan Pemberi Arus | — | 4.75 V to 5.25 V (5 V typical) |
| Gambaran Tegangan Output | — | 1.0 V to 4.9 V (ratiometric) |
| Sensitivity | — | 1.0 V/kPa (typical, ratiometric to 5 V) |
| Suhu Operasi | — | 0C to +85C |
| Accuracy (Linearity) | — | +/-1.5% of full-scale span (typical) |
| Kemasan / Case | — | 8-DIP Module (axial port) |
| Port Style | — | Axial pressure port with vent |
| Output Impedance | — | [DATA_NEEDED: output impedance] |
| Pressure Port | — | Vented gauge (back-side referenced to ambient) |
| Moisture Sensitivity | — | Non-condensing environments only |