MPX2200GP vs MPX2202GP Perbandingan
Perbandingan bersamaan detil MPX2200GP dari STMicroelectronics dan MPX2202GP dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
STMicroelectronics
MPX2200GP - 200 kPa Vented Gauge Pressure Sensor | STMicroelectronics
MPX2200GP ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | MPX2200GP | MPX2202GP |
|---|---|---|
| Merek | STMicroelectronics | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Aktif |
| Manufacturer | STMicroelectronics | — |
| Tipe Pengukur | Pressure Sensor - Vented Gauge | — |
| Operating Pressure Range | 0 kPa to 200 kPa (0 to 29.01 PSI) | 0 kPa to 200 kPa (0 to 29.01 PSI) |
| Maximum Overpressure | [DATA_NEEDED: maximum overpressure rating] | — |
| Port Type | Male - 0.19 inch (4.93 mm) Tube | — |
| Tipe Output | Analog Wheatstone Bridge | — |
| Full-Scale Span | 0 mV to 40 mV (typical, at 10 V excitation) | — |
| Excitation Voltage | 10 V (typical DC) | — |
| Pressure Reference | Vented Gauge (atmospheric backside) | — |
| Suhu Kerja | [DATA_NEEDED: operating temperature range] | -40 C to +125 C [DATA_NEEDED: confirm from datasheet curves] |
| Bridge Resistance | [DATA_NEEDED: input/output bridge resistance] | — |
| Linearity | [DATA_NEEDED: linearity percentage] | — |
| Temperature Compensation | On-chip (laser-trimmed) | — |
| Paket / Case | 4-SIP Module (4-344C) | 4-SIP Top Port Module |
| Tipe Mounting | Through-Hole | Through Hole |
| Port Side | Single port | — |
| Status RoHS | Compliant (per distributor listing) | [DATA_NEEDED: RoHS compliance] |
| Pressure Type | — | Vented Gauge |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Tegangan Output | — | 0 mV to 40 mV (at 10 V excitation) |
| Tegangan Pemuat | — | 10 V DC nominal |
| Arus Pemuat | — | [DATA_NEEDED: supply current] |
| Port Size | — | Male, 0.19 in (4.93 mm) Tube |
| Termination Style | — | Through-Hole (PCB) |
| Accuracy | — | [DATA_NEEDED: linearity / accuracy specification] |
| Media Compatibility | — | Dry air or non-corrosive gases (per datasheet) |
| Compensation | — | On-chip temperature compensated and calibrated |