MPXAZ6115A7U vs MPXAZ4115A6U Perbandingan
Perbandingan bersamaan detil MPXAZ6115A7U dari NXP Semiconductors dan MPXAZ4115A6U dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | MPXAZ6115A7U | MPXAZ4115A6U |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Aktif |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Operating Pressure Min | 15 kPa | — |
| Operating Pressure Max | 115 kPa | — |
| Tipe Output | Analog Voltage | Analog (calibrated, ratiometric) |
| Rentang Tegangan Output | 0.2 V to 4.7 V | 0.2 V to 4.8 V |
| Tegangan Pemuat | 5.0 V typical | — |
| Sensitivity | [DATA_NEEDED: typical sensitivity mV/kPa] | 46.4 mV/kPa (nominal) |
| Accuracy | ±1.5% (0C to 85C, after NXP factory calibration) | +/-1.5% over 0C to +85C (typical) |
| Suhu Kerja | -40C to +125C | — |
| Port Style | Top axial tube, 0.13" (3.17 mm) diameter | — |
| Paket / Case | 8-DIP Module (0.560 inch, 14.22 mm) | 8-SMD Gull Wing module |
| Tipe Mounting | Through-Hole | Surface Mount |
| Media Compatibility | Non-corrosive dry gases (media resistant) | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | — |
| Temperature Compensation | On-chip, factory calibrated | — |
| Status RoHS | Compliant | Compliant |
| Supply Voltage Range | — | 4.85 V to 5.35 V |
| Rentang Suhu Kerja | — | -40C to +125C |
| Port Type | — | Media-resistant axial port |
| Media Resistant | — | Yes (humid and mild contaminants) |
| Integrated Signal Conditioning | — | Yes (on-chip amplifier, temperature compensation, calibration) |
| Off-Chip Calibration Required | — | No (factory trimmed) |
| Lead Free | — | Yes |