MPXAZ6115A7U vs MPXAZ6115A6U Perbandingan
Perbandingan bersamaan detil MPXAZ6115A7U dari NXP Semiconductors dan MPXAZ6115A6U dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | MPXAZ6115A7U | MPXAZ6115A6U |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Obsolete |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Operating Pressure Min | 15 kPa | — |
| Operating Pressure Max | 115 kPa | — |
| Tipe Output | Analog Voltage | Analog Voltage |
| Rentang Tegangan Output | 0.2 V to 4.7 V | 0.2 V to 4.7 V |
| Tegangan Pemuat | 5.0 V typical | 5 V typical (ratiometric output) |
| Sensitivity | [DATA_NEEDED: typical sensitivity mV/kPa] | — |
| Accuracy | ±1.5% (0C to 85C, after NXP factory calibration) | ±1.5% |
| Suhu Kerja | -40C to +125C | — |
| Port Style | Top axial tube, 0.13" (3.17 mm) diameter | No Port (axial side-mount package) |
| Paket / Case | 8-DIP Module (0.560 inch, 14.22 mm) | — |
| Tipe Mounting | Through-Hole | Surface Mount |
| Media Compatibility | Non-corrosive dry gases (media resistant) | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | On-chip, temperature compensated, calibrated |
| Temperature Compensation | On-chip, factory calibrated | — |
| Status RoHS | Compliant | Compliant |
| Maximum Overpressure | — | 400 kPa (58.02 PSI) |
| Rentang Suhu Kerja | — | -40C to +125C |
| Media Resistance | — | Yes (gel-protected, Z-suffix) |
| Paket | — | 8-SMD Module, axial port |
| Sensor Technology | — | Piezoresistive MEMS |
| Reach Status | — | Compliant |