MPXH6115A6U vs MPXAZ6115AP Perbandingan
Perbandingan bersamaan detil MPXH6115A6U dari NXP Semiconductors dan MPXAZ6115AP dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
NXP Semiconductors
MPXH6115A6U - 15-115 kPa Absolute Pressure Sensor, SOIC-8 | NXP
MPXH6115A6U ✓ AktifNXP Semiconductors
MPXAZ6115AP - 15-115 kPa Absolute Pressure Sensor, Side Port | NXP
MPXAZ6115AP ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | MPXH6115A6U | MPXAZ6115AP |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Aktif |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Maximum Over-Pressure | 400 kPa | — |
| Sensitivity | 45.9 mV/kPa (typical) | — |
| Accuracy (0C to 85C) | 1.5 % (max) | — |
| Rentang Tegangan Output | 0.2 V to 4.7 V | 0.2 V to 4.7 V |
| Tegangan Pemuat | 4.75 V to 5.25 V | 4.75 V to 5.25 V (5 V nominal) |
| Arus Pemuat | 6 mA (typical) | — |
| Suhu Kerja | -40C to +125C | -40 C to +125 C |
| Compensated Temperature | 0C to +85C | — |
| Tipe Output | Analog, ratiometric to VCC | Analog Voltage |
| Paket | 8-SOIC (0.295", 7.50 mm width) with top-side pressure port | 8-SMD, Gull Wing, Side Port (SOP-8) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Pressure Port | Vertical/Horizontal axial port (case variant 6) | — |
| Status RoHS | [DATA_NEEDED: RoHS compliance] | Compliant |
| Media Compatibility | Dry air, non-corrosive gases only | — |
| Maximum Overpressure | — | [DATA_NEEDED: maximum overpressure rating] |
| Accuracy | — | +/-1.5% |
| Port Style | — | Male 0.13 in (3.17 mm) tube, side-mounted |
| Technology | — | Piezoresistive silicon, monolithic with on-chip bipolar op-amp |
| Temperature Compensation | — | On-chip, -40 C to +125 C |
| Port Material | — | PPS thermoplastic (media resistant) |