TLD1211SJFUMA1 vs TLD1310ELXUMA1 Perbandingan

Perbandingan bersamaan detil TLD1211SJFUMA1 dari Infineon dan TLD1310ELXUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Perbandingan Spesifikasi

Parameter Umum TLD1211SJFUMA1 TLD1310ELXUMA1
Merek Infineon Infineon
Kategori LED Drivers LED Drivers
Status Lingkungan Hidup Aktif Aktif
Product Type Linear LED Driver IC —
Jumlah Output 1 —
Topologi Linear Constant-Current Linear High-Side Current Source
Arus Output Maximum 85 mA —
Supply Voltage Range (Vs) 5.5 V to 28 V —
Load-Dump Tolerance 40 V —
Dimming Interface PWM via EN pin (CMOS/TTL) —
EN High-Level Voltage (V_EN,ON) 1 V to 5.5 V —
EN Low-Level Voltage (V_EN,OFF) -0.3 V to 0.3 V —
EN Input Current (I_EN) 60 to 130 uA (V_EN = 5 V) —
Sense Voltage (Vsense) Programmed by external resistor —
Drop Voltage (Vs - Vout) 1.3 V typical (Iout < 15 mA, Vsense = 0 mV, Vs = 8 V) —
Rentang Suhu Kerja -40 C to +150 C (junction) -40 °C to +150 °C (junction)
Paket PG-DSO-8-16 (8-pin, exposed pad) PG-SSOP-14-5 (14-pin SSOP with exposed pad)
Tipe Mounting Surface Mount Surface Mount
Automotive Qualification AEC-Q100 targeted (Automotive Grade) —
Status RoHS Compliant Compliant
Number of Channels — 3
Output Current per Channel — 120 mA (max)
Total Output Current — 360 mA (sum of all channels)
Supply Voltage Range — 5.5 V to 40 V
Supported Bus Voltages — 9 V / 12 V / 15 V / 18 V / 24 V (automotive)
Dimming Method — Analog and Digital (PWM via EN/PWM pin)
AEC-Q100 Qualification — Yes (Automotive Grade)
Current Accuracy — [DATA_NEEDED: typical current accuracy %]
Tegangan Turun — [DATA_NEEDED: typical dropout voltage]
Level MSL — 3
Diagnostic Features — Open-load, Short-to-ground, Over-temperature
Product Family — LITIX Basic

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon