TLE7258SJXUMA1 vs TLE7250XLEXUMA1 Perbandingan
Perbandingan bersamaan detil TLE7258SJXUMA1 dari Infineon dan TLE7250XLEXUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | TLE7258SJXUMA1 | TLE7250XLEXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | LIN bus transceiver | Half-duplex CAN transceiver |
| LIN Data Rate | 20 kbps | — |
| LIN Standard Support | LIN 1.2 through LIN 2.2A | — |
| Supply Voltage Range | 5.5 V to 18 V | — |
| Regulated Output Voltage | 3.3 V or 5.0 V | — |
| Integrated Voltage Regulator | Yes | — |
| Wake-Up Support | Yes | — |
| Standby Control | EN input with internal pull-down resistor | — |
| ISO 17987-4 Compliance | Compliant | — |
| SAE J2602-2 Compliance | Compliant | — |
| Automotive Qualification | AEC-Q100 qualified | AEC-Q100 |
| Paket | PG-DSO-8 | PG-TSON-8-1 |
| Jumlah Pin | 8 pins | — |
| Tipe Mounting | Surface mount | Surface mount |
| Status RoHS | Compliant | Compliant |
| REACH Status | Compliant | — |
| Halogen-Free Status | Yes | Halogen free |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Transceiver Configuration | 1 transmit/1 receive | — |
| Low-Power Modes | Supported | — |
| CAN Data Rate | — | Up to 2 Mbit/s |
| CAN Standard | — | ISO 11898-2 |
| CAN FD Support | — | Up to 2 Mbit/s |
| Tegangan Pemuat | — | 3.3 V or 5 V |
| Power-Down Function | — | Supported |
| Number of Terminals | — | 8 |
| Maximum Seated Height | — | 1.15 mm |
| Package Shape | — | Square |
| Terminal Form | — | No lead |
| Automated Optical Inspection | — | PG-TSON-8 solder joints support AOI |
| Transmitter and Receiver Count | — | 1/1 |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| CAN Bus Interface | — | [DATA_NEEDED: CANH and CANL electrical parameters] |
| Loop Delay | — | [DATA_NEEDED: transmitter and receiver loop delay] |