TLE7258SJXUMA1 vs TLE7250XLEXUMA1 So sánh
So sánh chi tiết song song của TLE7258SJXUMA1 bằng Infineon và TLE7250XLEXUMA1 bằng Infineon. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
So sánh thông số kỹ thuật
| Tham số | TLE7258SJXUMA1 | TLE7250XLEXUMA1 |
|---|---|---|
| Thương hiệu | Infineon | Infineon |
| Danh mục | Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | LIN bus transceiver | Half-duplex CAN transceiver |
| LIN Data Rate | 20 kbps | — |
| LIN Standard Support | LIN 1.2 through LIN 2.2A | — |
| Supply Voltage Range | 5.5 V to 18 V | — |
| Regulated Output Voltage | 3.3 V or 5.0 V | — |
| Integrated Voltage Regulator | Yes | — |
| Wake-Up Support | Yes | — |
| Standby Control | EN input with internal pull-down resistor | — |
| ISO 17987-4 Compliance | Compliant | — |
| SAE J2602-2 Compliance | Compliant | — |
| Automotive Qualification | AEC-Q100 qualified | AEC-Q100 |
| Hộp | PG-DSO-8 | PG-TSON-8-1 |
| Số chân | 8 pins | — |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Trạng thái RoHS | Compliant | Compliant |
| REACH Status | Compliant | — |
| Halogen-Free Status | Yes | Halogen free |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Transceiver Configuration | 1 transmit/1 receive | — |
| Low-Power Modes | Supported | — |
| CAN Data Rate | — | Up to 2 Mbit/s |
| CAN Standard | — | ISO 11898-2 |
| CAN FD Support | — | Up to 2 Mbit/s |
| Điện áp cung cấp | — | 3.3 V or 5 V |
| Power-Down Function | — | Supported |
| Number of Terminals | — | 8 |
| Maximum Seated Height | — | 1.15 mm |
| Package Shape | — | Square |
| Terminal Form | — | No lead |
| Automated Optical Inspection | — | PG-TSON-8 solder joints support AOI |
| Transmitter and Receiver Count | — | 1/1 |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| CAN Bus Interface | — | [DATA_NEEDED: CANH and CANL electrical parameters] |
| Loop Delay | — | [DATA_NEEDED: transmitter and receiver loop delay] |