TPS62840DLCR vs FAN5308MPX Perbandingan
Perbandingan bersamaan detil TPS62840DLCR dari Texas Instruments dan FAN5308MPX dari onsemi. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | TPS62840DLCR | FAN5308MPX |
|---|---|---|
| Merek | Texas Instruments | onsemi |
| Kategori | DC-DC Converters | DC-DC Converters |
| Status Lingkungan Hidup | Aktif | Aktif |
| Harga Unit (USD) | $1,21 | — |
| Topologi | Synchronous Step-Down (Buck) Converter | Synchronous Buck (Step-Down) |
| Rentang Tegangan Masukan | 1.8 V to 6.5 V | 2.5 V to 5.5 V |
| Rentang Tegangan Output | Adjustable (0.8 V to V_IN) | 0.8 V to 5.5 V (adjustable) |
| Arus Output Maximum | 750 mA | 800 mA |
| Typical Quiescent Current | 60 nA | — |
| Quiescent Current (100% Mode) | 120 nA | — |
| Nominal Switching Frequency | 1.8 MHz | — |
| Control Topology | DCS-Control (voltage-mode + current-mode) | — |
| Efficiency at 1 uA Load (3.6 VIN to 1.8 VOUT) | 80% | — |
| Efficiency at Full Load | [DATA_NEEDED: efficiency at 750 mA] | — |
| Arus Menutup | [DATA_NEEDED: shutdown IQ] | — |
| STOP Pin | Yes (disables switching) | — |
| Mulai Dengan Lebih Lambat | Programmable via SS pin capacitor | — |
| Suhu Hubung Kerja | -40C to +125C | — |
| Paket | 8-pin VFDFN (DLC), 3.0 x 3.0 mm | 6-WDFN Exposed Pad (MLP-6) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Level MSL | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL level] |
| Status RoHS | Compliant | Compliant |
| Frekuensi Pengganti | — | 1.3 MHz (fixed) |
| Peak Efficiency | — | 96 % |
| Light-Load Mode | — | PWM with pulse-skipping power-save mode |
| Maximum Duty Cycle | — | 100 % (pass-through mode) |
| Control Architecture | — | Current-mode PWM |
| Output Voltage Accuracy | — | [DATA_NEEDED: output voltage accuracy %] |
| Arus Memerintah | — | [DATA_NEEDED: quiescent current uA] |
| Suhu Kerja | — | -40 C to +85 C |
| Internal MOSFETs | — | Yes (high-side + low-side synchronous) |
| External Compensation | — | Not required (internal compensation) |