TUSB212RWBT vs TUSB212RWBR Perbandingan
Perbandingan bersamaan detil TUSB212RWBT dari Texas Instruments dan TUSB212RWBR dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
TUSB212RWBT - USB 2.0 HS Signal Conditioner | Texas Instruments
TUSB212RWBT ✓ AktifTexas Instruments
TUSB212RWBR - USB 2.0 HS Signal Conditioner | Texas Instruments
TUSB212RWBR ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | TUSB212RWBT | TUSB212RWBR |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | USB 2.0 high-speed signal conditioner | USB 2.0 High-Speed Signal Conditioner |
| USB Version | USB 2.0 | — |
| Supported USB Speeds | Low-Speed, Full-Speed, and High-Speed | — |
| Compatibility | USB 2.0, OTG 2.0, and BC 1.2 | — |
| Maximum Pre-Channel Length | 5 m | — |
| Maximum Post-Channel Length | 2 m | — |
| AC Boost Configuration | Four selectable settings | — |
| Configuration Interface | Pin strap or I2C | — |
| Differential Pair Handling | D1P/M and D2P/M interchangeable | — |
| Host Device Role | Host and device agnostic | — |
| Gain Architecture | Selectable gain with daisy-chain support | — |
| Correction Function | Intersymbol interference compensation | — |
| Paket | 12-X2QFN | 12-X2QFN (1.6 mm x 1.6 mm) |
| Package Dimensions | 1.6 mm x 1.6 mm | — |
| Tipe Mounting | Surface mount | Surface Mount |
| Status RoHS | Compliant | Compliant |
| Status Lingkungan Hidup | Active | — |
| Supply Voltage Range | [DATA_NEEDED: Supply voltage range] | — |
| Rentang Suhu Kerja | [DATA_NEEDED: Operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Maximum USB Data Rate | [DATA_NEEDED: Maximum USB data rate] | — |
| Propagation Delay | [DATA_NEEDED: Propagation delay] | — |
| I2C Address | [DATA_NEEDED: I2C address] | — |
| Supported USB Speed | — | USB 2.0 High-Speed |
| Signal Compensation Function | — | Programmable AC boost and DC boost |
| Target Signal Distortion | — | Intersymbol interference from transmission-channel loss |
| Low-Speed Behavior | — | Unaffected by the High-Speed compensation |
| Full-Speed Behavior | — | Unaffected by the High-Speed compensation |
| USB On-The-Go Compatibility | — | Compatible |
| Jumlah Pin | — | 12 pins |
| Production Data Marking | — | PRODUCTION DATA |
| Manufacturer Document Revision | — | Revision A, September 2017 |
| Rentang Tegangan Masukan | — | [DATA_NEEDED: input voltage range] |
| Maximum Data Rate | — | 480 Mb/s |
| AC Boost Range | — | [DATA_NEEDED: programmable AC boost range] |
| DC Boost Range | — | [DATA_NEEDED: programmable DC boost range] |
| Arus Pemuat | — | [DATA_NEEDED: operating supply current] |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |