TUSB212RWBT vs TUSB212RWBR Comparison
Detailed side-by-side comparison of TUSB212RWBT by Texas Instruments and TUSB212RWBR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
TUSB212RWBT - USB 2.0 HS Signal Conditioner | Texas Instruments
TUSB212RWBT ✓ ActiveTexas Instruments
TUSB212RWBR - USB 2.0 HS Signal Conditioner | Texas Instruments
TUSB212RWBR ✓ ActiveSpecification Comparison
| Parameter | TUSB212RWBT | TUSB212RWBR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | USB 2.0 high-speed signal conditioner | USB 2.0 High-Speed Signal Conditioner |
| USB Version | USB 2.0 | — |
| Supported USB Speeds | Low-Speed, Full-Speed, and High-Speed | — |
| Compatibility | USB 2.0, OTG 2.0, and BC 1.2 | — |
| Maximum Pre-Channel Length | 5 m | — |
| Maximum Post-Channel Length | 2 m | — |
| AC Boost Configuration | Four selectable settings | — |
| Configuration Interface | Pin strap or I2C | — |
| Differential Pair Handling | D1P/M and D2P/M interchangeable | — |
| Host Device Role | Host and device agnostic | — |
| Gain Architecture | Selectable gain with daisy-chain support | — |
| Correction Function | Intersymbol interference compensation | — |
| Package | 12-X2QFN | 12-X2QFN (1.6 mm x 1.6 mm) |
| Package Dimensions | 1.6 mm x 1.6 mm | — |
| Mounting Type | Surface mount | Surface Mount |
| RoHS Status | Compliant | Compliant |
| Lifecycle Status | Active | — |
| Supply Voltage Range | [DATA_NEEDED: Supply voltage range] | — |
| Operating Temperature Range | [DATA_NEEDED: Operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Maximum USB Data Rate | [DATA_NEEDED: Maximum USB data rate] | — |
| Propagation Delay | [DATA_NEEDED: Propagation delay] | — |
| I2C Address | [DATA_NEEDED: I2C address] | — |
| Supported USB Speed | — | USB 2.0 High-Speed |
| Signal Compensation Function | — | Programmable AC boost and DC boost |
| Target Signal Distortion | — | Intersymbol interference from transmission-channel loss |
| Low-Speed Behavior | — | Unaffected by the High-Speed compensation |
| Full-Speed Behavior | — | Unaffected by the High-Speed compensation |
| USB On-The-Go Compatibility | — | Compatible |
| Pin Count | — | 12 pins |
| Production Data Marking | — | PRODUCTION DATA |
| Manufacturer Document Revision | — | Revision A, September 2017 |
| Input Voltage Range | — | [DATA_NEEDED: input voltage range] |
| Maximum Data Rate | — | 480 Mb/s |
| AC Boost Range | — | [DATA_NEEDED: programmable AC boost range] |
| DC Boost Range | — | [DATA_NEEDED: programmable DC boost range] |
| Supply Current | — | [DATA_NEEDED: operating supply current] |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |